X-Git-Url: http://git.vanrenterghem.biz/git.ikiwiki.info.git/blobdiff_plain/dd758c7118be05d9a104c36762da4e5956d5bc17..276b814bb9f53291f1ebe1cc510d49f1ba4719c8:/doc/todo/different_search_engine.mdwn

diff --git a/doc/todo/different_search_engine.mdwn b/doc/todo/different_search_engine.mdwn
index 24f85f80f..2f309dea5 100644
--- a/doc/todo/different_search_engine.mdwn
+++ b/doc/todo/different_search_engine.mdwn
@@ -1,7 +1,332 @@
-After using it for a while, my feeling is that hyperestradier, as used in
+[[done]], using xapian-omega! --[[Joey]]
+
+After using it for a while, my feeling is that hyperestraier, as used in
 the [[plugins/search]] plugin, is not robust enough for ikiwiki. It doesn't
-upgrade well, and it has a habit of sig-11 on certian input from time to
+upgrade well, and it has a habit of sig-11 on certain input from time to
 time.
 
-So some other engine should be found and used instead. Enrico had one that
-he was using for debtags stuff that looked pretty good.
+So some other engine should be found and used instead. 
+
+Enrico had one that he was using for debtags stuff that looked pretty good.
+That was [Xapian](http://www.xapian.org/), which has perl bindings in
+libsearch-xapian-perl. The nice thing about xapian is that it does a ranked
+search so it understands what words are most important in a search. (So
+does Lucene..) Another nice thing is it supports "more documents like this
+one" kind of search. --[[Joey]]
+
+## xapian
+
+I've invesitgated xapian briefly. I think a custom xapian indexer and use
+of the omega for cgi searches could work well for ikiwiki. --[[Joey]]
+
+### indexer
+
+A custom indexer is needed because omindex isn't good enough for ikiwiki's
+needs for incremental rendering. (And because, since ikiwiki has page info
+in memory, it's silly to write it to disk and have omindex read it back.)
+
+The indexer would run as a ikiwiki hook. It needs to be passed the page
+name, and the content. Which hook to use is an open question.
+Possibilities:
+
+* `filter` - Since this runs before preprocess, only the actual text
+  written on the page would be indexed. Not text generated by directives,
+  pulled in by inlining, etc. There's something to be said for that. And
+  something to be said against it. It would also get markdown formatted
+  content, mostly, though it would still need to strip html, and also
+  probably strip preprocessor directives too.
+* `sanitize` - Would get the htmlized content, so would need to strip html.
+  Preprocessor directive output would be indexed. Doesn't get a destpage
+  parameter, making optimisation hard.
+* `format` - Would get the entire html page, including the page template.
+  Probably not a good choice as indexing the same template for each page
+  is unnecessary.
+
+The hook would remove any html from the content, and index it.
+It would need to add the same document data that omindex would.
+
+The indexer (and deleter) will need a way to figure out the ids in xapian
+of the documents to delete. One way is storing the id of each page in the
+ikiwiki index.
+
+The other way would be adding a special term to the xapian db that can be
+used with replace_document_by_term/delete_document_by_term. 
+Hmm, let's use a term named "P<pagename>".
+
+The hook should try to avoid re-indexing pages that have not changed since
+they were last indexed. One problem is that, if a page with an inline is
+built, every inlined item will get each hook run. And so a naive hook would
+index each of those items, even though none of them have necessarily
+changed. Date stamps are one possibility. Another would be to avoid having
+the hook not do any indexing when `%preprocessing` is set (Ikiwiki.pm would
+need to expose that variable.) Another approach would be to use a
+needsbuild hook and only index the pages that are being built.
+
+#### cgi
+
+The cgi hook would exec omega to handle the searching, much as is done
+with estseek in the current search plugin.
+
+It would first set `OMEGA_CONFIG_FILE=.ikiwiki/omega.conf` ; that omega.conf
+would set `database_dir=.ikiwiki/xapian` and probably also set a custom
+`template_dir`, which would have modified templates branded for ikiwiki. So
+the actual xapian db would be in `.ikiwiki/xapian/default/`.
+
+## lucene
+
+>> I've done a bit of prototyping on this. The current hip search library is [Lucene](http://lucene.apache.org/java/docs/). There's a Perl port called [Plucene](http://search.cpan.org/~tmtm/Plucene-1.25/). Given that it's already packaged, as `libplucene-perl`, I assumed it would be a good starting point. I've written a **very rough** patch against `IkiWiki/Plugin/search.pm` to handle the indexing side (there's no facility to view the results yet, although I have a command-line interface working). That's below, and should apply to SVN trunk.
+
+>> Of course, there are problems. ;-)
+
+>> * Plucene throws up a warning when running under Taint mode. There's a patch on the mailing list, but I haven't tried applying it yet. So for now you'll have to build IkiWiki with `NOTAINT=1 make install`.
+>> * If I kill `ikiwiki` while it's indexing, I can screw up Plucene's locks. I suspect that this will be an easy fix.
+
+>> There is a [C++ port of Lucene](http://sourceforge.net/projects/clucene/) which is packaged as `libclucene0`. The Perl interface to this is called [Lucene](http://search.cpan.org/~tbusch/Lucene-0.09/lib/Lucene.pm). This is supposed to be significantly faster, and presumably won't have the taint bug. The API is virtually the same, so it will be easy to switch over. I'd use this now, were it not for the lack of package. (I assume you won't want to make core functionality depend on installing a module from CPAN). I've never built a Debian package before, so I can either learn then try building this, or somebody else could do the honours. ;-)
+
+>> If this seems a sensible approach, I'll write the CGI interface, and clean up the plugin. -- Ben
+
+>>> The weird thing about lucene is that these are all reimplmentations of
+>>> it. Thank you java.. The C++ version seems like a better choice to me
+>>> (packages are trivial). --[[Joey]]
+
+> Might I suggest renaming the "search" plugin to "hyperestraier", and then creating new search plugins for different engines?  No reason to pick a single replacement. --[[JoshTriplett]]
+
+<pre>
+Index: IkiWiki/Plugin/search.pm
+===================================================================
+--- IkiWiki/Plugin/search.pm    (revision 2755)
++++ IkiWiki/Plugin/search.pm    (working copy)
+@@ -1,33 +1,55 @@
+ #!/usr/bin/perl
+-# hyperestraier search engine plugin
+ package IkiWiki::Plugin::search;
+ 
+ use warnings;
+ use strict;
+ use IkiWiki;
+ 
++use Plucene::Analysis::SimpleAnalyzer;
++use Plucene::Document;
++use Plucene::Document::Field;
++use Plucene::Index::Reader;
++use Plucene::Index::Writer;
++use Plucene::QueryParser;
++use Plucene::Search::HitCollector;
++use Plucene::Search::IndexSearcher;
++
++#TODO: Run the Plucene optimiser after a rebuild
++#TODO: CGI query interface
++
++my $PLUCENE_DIR;
++# $config{wikistatedir} may not be defined at this point, so we delay setting $PLUCENE_DIR
++# until a subroutine actually needs it.
++sub init () {
++  error("Plucene: Statedir <$config{wikistatedir}> does not exist!") 
++    unless -e $config{wikistatedir};
++  $PLUCENE_DIR = $config{wikistatedir}.'/plucene';  
++}
++
+ sub import { #{{{
+-       hook(type => "getopt", id => "hyperestraier",
+-               call => \&amp;getopt);
+-       hook(type => "checkconfig", id => "hyperestraier",
++       hook(type => "checkconfig", id => "plucene",
+                call => \&amp;checkconfig);
+-       hook(type => "pagetemplate", id => "hyperestraier",
+-               call => \&amp;pagetemplate);
+-       hook(type => "delete", id => "hyperestraier",
++       hook(type => "delete", id => "plucene",
+                call => \&amp;delete);
+-       hook(type => "change", id => "hyperestraier",
++       hook(type => "change", id => "plucene",
+                call => \&amp;change);
+-       hook(type => "cgi", id => "hyperestraier",
+-               call => \&amp;cgi);
+ } # }}}
+ 
+-sub getopt () { #{{{
+-        eval q{use Getopt::Long};
+-       error($@) if $@;
+-        Getopt::Long::Configure('pass_through');
+-        GetOptions("estseek=s" => \$config{estseek});
+-} #}}}
+ 
++sub writer {
++  init();
++  return Plucene::Index::Writer->new(
++      $PLUCENE_DIR, Plucene::Analysis::SimpleAnalyzer->new(), 
++      (-e "$PLUCENE_DIR/segments" ? 0 : 1));
++}
++
++#TODO: Better name for this function.
++sub src2rendered_abs (@) {
++  return map { Encode::encode_utf8($config{destdir}."/$_") } 
++    map { @{$renderedfiles{pagename($_)}} } 
++    grep { defined pagetype($_) } @_;
++}
++
+ sub checkconfig () { #{{{
+        foreach my $required (qw(url cgiurl)) {
+                if (! length $config{$required}) {
+@@ -36,112 +58,55 @@
+        }
+ } #}}}
+ 
+-my $form;
+-sub pagetemplate (@) { #{{{
+-       my %params=@_;
+-       my $page=$params{page};
+-       my $template=$params{template};
++#my $form;
++#sub pagetemplate (@) { #{{{
++#      my %params=@_;
++#      my $page=$params{page};
++#      my $template=$params{template};
++#
++#      # Add search box to page header.
++#      if ($template->query(name => "searchform")) {
++#              if (! defined $form) {
++#                      my $searchform = template("searchform.tmpl", blind_cache => 1);
++#                      $searchform->param(searchaction => $config{cgiurl});
++#                      $form=$searchform->output;
++#              }
++#
++#              $template->param(searchform => $form);
++#      }
++#} #}}}
+ 
+-       # Add search box to page header.
+-       if ($template->query(name => "searchform")) {
+-               if (! defined $form) {
+-                       my $searchform = template("searchform.tmpl", blind_cache => 1);
+-                       $searchform->param(searchaction => $config{cgiurl});
+-                       $form=$searchform->output;
+-               }
+-
+-               $template->param(searchform => $form);
+-       }
+-} #}}}
+-
+ sub delete (@) { #{{{
+-       debug(gettext("cleaning hyperestraier search index"));
+-       estcmd("purge -cl");
+-       estcfg();
++       debug("Plucene: purging: ".join(',',@_));
++       init();
++  my $reader = Plucene::Index::Reader->open($PLUCENE_DIR);
++  my @files = src2rendered_abs(@_);
++  for (@files) {
++    $reader->delete_term( Plucene::Index::Term->new({ field => "id", text => $_ }));
++  }
++  $reader->close;
+ } #}}}
+ 
+ sub change (@) { #{{{
+-       debug(gettext("updating hyperestraier search index"));
+-       estcmd("gather -cm -bc -cl -sd",
+-               map {
+-                       Encode::encode_utf8($config{destdir}."/".$_)
+-                               foreach @{$renderedfiles{pagename($_)}};
+-               } @_
+-       );
+-       estcfg();
++       debug("Plucene: updating search index");
++  init();
++  #TODO: Do we want to index source or rendered files?
++  #TODO: Store author, tags, etc. in distinct fields; may need new API hook.
++  my @files = src2rendered_abs(@_);
++  my $writer = writer();    
++   
++  for my $file (@files) {
++    my $doc = Plucene::Document->new;
++    $doc->add(Plucene::Document::Field->Keyword(id => $file));
++    my $data;
++    eval { $data = readfile($file) };
++    if ($@) {
++      debug("Plucene: can't read <$file> - $@");
++      next;
++    }
++    debug("Plucene: indexing <$file> (".length($data).")");
++    $doc->add(Plucene::Document::Field->UnStored('text' => $data));
++    $writer->add_document($doc);
++  }
+ } #}}}
+-
+-sub cgi ($) { #{{{
+-       my $cgi=shift;
+-
+-       if (defined $cgi->param('phrase') || defined $cgi->param("navi")) {
+-               # only works for GET requests
+-               chdir("$config{wikistatedir}/hyperestraier") || error("chdir: $!");
+-               exec("./".IkiWiki::basename($config{cgiurl})) || error("estseek.cgi failed");
+-       }
+-} #}}}
+-
+-my $configured=0;
+-sub estcfg () { #{{{
+-       return if $configured;
+-       $configured=1;
+-
+-       my $estdir="$config{wikistatedir}/hyperestraier";
+-       my $cgi=IkiWiki::basename($config{cgiurl});
+-       $cgi=~s/\..*$//;
+-
+-       my $newfile="$estdir/$cgi.tmpl.new";
+-       my $cleanup = sub { unlink($newfile) };
+-       open(TEMPLATE, ">:utf8", $newfile) || error("open $newfile: $!", $cleanup);
+-       print TEMPLATE IkiWiki::misctemplate("search", 
+-               "<!--ESTFORM-->\n\n<!--ESTRESULT-->\n\n<!--ESTINFO-->\n\n",
+-               baseurl => IkiWiki::dirname($config{cgiurl})."/") ||
+-                       error("write $newfile: $!", $cleanup);
+-       close TEMPLATE || error("save $newfile: $!", $cleanup);
+-       rename($newfile, "$estdir/$cgi.tmpl") ||
+-               error("rename $newfile: $!", $cleanup);
+-
+-       $newfile="$estdir/$cgi.conf";
+-       open(TEMPLATE, ">$newfile") || error("open $newfile: $!", $cleanup);
+-       my $template=template("estseek.conf");
+-       eval q{use Cwd 'abs_path'};
+-       $template->param(
+-               index => $estdir,
+-               tmplfile => "$estdir/$cgi.tmpl",
+-               destdir => abs_path($config{destdir}),
+-               url => $config{url},
+-       );
+-       print TEMPLATE $template->output || error("write $newfile: $!", $cleanup);
+-       close TEMPLATE || error("save $newfile: $!", $cleanup);
+-       rename($newfile, "$estdir/$cgi.conf") ||
+-               error("rename $newfile: $!", $cleanup);
+-
+-       $cgi="$estdir/".IkiWiki::basename($config{cgiurl});
+-       unlink($cgi);
+-       my $estseek = defined $config{estseek} ? $config{estseek} : '/usr/lib/estraier/estseek.cgi';
+-       symlink($estseek, $cgi) || error("symlink $estseek $cgi: $!");
+-} # }}}
+-
+-sub estcmd ($;@) { #{{{
+-       my @params=split(' ', shift);
+-       push @params, "-cl", "$config{wikistatedir}/hyperestraier";
+-       if (@_) {
+-               push @params, "-";
+-       }
+-
+-       my $pid=open(CHILD, "|-");
+-       if ($pid) {
+-               # parent
+-               foreach (@_) {
+-                       print CHILD "$_\n";
+-               }
+-               close(CHILD) || print STDERR "estcmd @params exited nonzero: $?\n";
+-       }
+-       else {
+-               # child
+-               open(STDOUT, "/dev/null"); # shut it up (closing won't work)
+-               exec("estcmd", @params) || error("can't run estcmd");
+-       }
+-} #}}}
+-
+-1
++1;
+</pre>
+
+