X-Git-Url: http://git.vanrenterghem.biz/git.ikiwiki.info.git/blobdiff_plain/6dab2fb5402f38e58e06ca83de777c8637a4c38f..b1551ed0e297e75492e578bf2445fcde99dad86a:/doc/setup.mdwn diff --git a/doc/setup.mdwn b/doc/setup.mdwn index 4f4f8a8e7..89444c9a8 100644 --- a/doc/setup.mdwn +++ b/doc/setup.mdwn @@ -1,231 +1,135 @@ This tutorial will walk you through setting up a wiki with ikiwiki. -[[toc ]] +[[!toc ]] -### 1. [[Download]] and [[install]] ikiwiki. +## Install ikiwiki -### 2. Decide where your wiki's files will go. +If you're using Debian or Ubuntu, ikiwiki is an `apt-get install ikiwiki` away. +If you're not, see the [[download]] and [[install]] pages. -As a wiki compiler, ikiwiki builds a wiki from files in a source directory, -and outputs the files to a destination directory. If you keep your wiki in -a version control system, the source directory will contain a working copy -checked out from the version control system. +## Create your wiki -For the purposes of this tutorial, we'll set shell variables -for these locations, and use those variables in the commands that follow. +All it takes to create a fully functional wiki using ikiwiki is running +one command. +[[!template id=note text=""" +For more control, advanced users may prefer to set up a wiki +[[by_hand|byhand]]. +"""]] - SRCDIR=~/wikiwc - DESTDIR=~/public_html/wiki/ + % ikiwiki -setup /etc/ikiwiki/auto.setup -Note that ikiwiki owns the working copy directory; do not perform your own -edits in ikiwiki's working copy. +Or, set up a blog with ikiwiki, run this command instead. -### 3. Create the beginnings of your wiki. + % ikiwiki -setup /etc/ikiwiki/auto-blog.setup -This will create a simple main page for the wiki. +Either way, it will ask you a couple of questions. - mkdir $SRCDIR - cd $SRCDIR - $EDITOR index.mdwn + What will the wiki be named? foo + What revision control system to use? git + What wiki user (or openid) will be admin? joey + Choose a password: -In the editor, you could start by entering a simple page like -[[toggle id=page text="this one"]]. -[[toggleable id=page text=""" - Welcome to your new wiki. +Then, wait for it to tell you an url for your new site.. - All wikis are supposed to have a \[[SandBox]], - so this one does too. + Successfully set up foo: + url: http://example.com/~joey/foo + srcdir: ~/foo + destdir: ~/public_html/foo + repository: ~/foo.git + To modify settings, edit ~/foo.setup and then run: + ikiwiki -setup ~/foo.setup - ---- +Done! - This wiki is powered by [ikiwiki](http://ikiwiki.info). -"""]] - -See [[HelpOnFormatting]] for details about the markup language. +## Using the web interface -Note that several [[standard_wiki_pages|basewiki]] will be added to your -wiki, from files in `/usr/share/ikiwiki/basewiki/`, so your wiki will -automatically get a [[SandBox]], and some other useful pages. +Now you can go to the url it told you, and edit pages in your new wiki +using the web interface. -### 4. Build your wiki for the first time. +(If the web interface doesn't seem to allow editing or login, you may +need to configure [[configure_the_web_server|tips/dot_cgi]].) - ikiwiki --verbose $SRCDIR $DESTDIR --url=http://example.org/~you/wiki/ +## Checkout and edit wiki source -Replace the url with the real url to your wiki. You should now -be able to visit the url and see your wiki. +Part of the fun of using ikiwiki is not being limited to using the +web for editing pages, and instead using your favorite text editor and +[[Revision_Control_System|rcs]]. -### 5. Add content to your wiki. +To do this, you need to check out a copy of the source to your wiki. +(You should avoid making changes directly to the `srcdir`, as that +checkout is reserved for use by ikiwiki itself.) -Repeat steps 3 and 4 as desired, editing or adding pages and rebuilding the -wiki. - -To quickly get started on a common task like blogging with ikiwiki, you -can copy in files from the [[examples]]. The examples are located in -`doc/examples/` in the ikiwiki source package. +Depending on which [[Revision_Control_System|rcs]] you chose to use, +you can run one of these commands to check out your own copy of your wiki's +source. (Remember to replace "foo" with the real directory name.) -You can experiment with other ikiwiki parameters such as `--wikiname` -and `--rebuild` too. Get comfortable with its command line (see -[[usage]]). + git clone foo.git foo.src + svn checkout file://`pwd`/foo.svn/trunk foo.src + bzr clone foo foo.src + hg clone foo foo.src + # TODO monotone, tla -### 6. Add a setup file. +Now to edit pages by hand, go into the directory you checked out (ie, +"foo.src"), and fire up your text editor to edit `index.mdwn` or whatever +other page you want to edit. If you chose to set up a blog, there is even a +sample first post in `posts/first_post.mdwn` that you can edit. -By now you should be getting tired of typing in all the command line -options each time you change something in your wiki's setup. Time to -introduce setup files. - -A sample setup file is [[ikiwiki.setup]]. Download it (or copy it from -`doc/ikiwiki.setup` in the ikiwiki sources), and edit it. Note that this -file should *not* be put in your wiki's directory with the rest of the -files. A good place to put it is in a ~/.ikiwiki/ subdirectory. - -Most of the options, like `wikiname` in the setup file are the same as -ikiwiki's command line options (documented in [[usage]]. `srcdir` and -`destdir` are the two directories you specify when running ikiwiki by -hand. Make sure that these are pointing to the right directories, and -read through and configure the rest of the file to your liking. +Once you've edited a page, use your revision control system to commit +the changes. For distributed revision control systems, don't forget to push +your commit. -When you're satisfied, run `ikiwiki --setup ikiwiki.setup`, and it -will set everything up. +Once the commit reaches the repository, ikiwiki will notice it, and +automatically update the wiki with your changes. -### 7. Turn on additional features. +## Customizing the wiki -Now you have a basic wiki with a configuration file. Time to experiment -with ikiwiki's many features. - -Let's first enable a key wiki feature and set up [[CGI]] to allow -editing the wiki from the web. Just edit ikiwiki.setup, uncomment the -block for the cgi wrapper, make sure the filename for the cgi wrapper -is ok, run `ikiwiki --setup ikiwiki.setup`, and you're done! - -There are lots of other configuration options in ikiwiki.setup that you -can uncomment, configure, and enable by re-running -`ikiwiki --setup ikiwiki.setup`. Be sure to browse through all the -[[plugins]].. - -### 8. Put your wiki in revision control. - -At this point you might want to check your wiki in to a revision control -system so you can keep track of changes and revert edits. Depending -on the revision control system you choose, the way this is done varies. - -There's little that's ikiwiki specific about these instructions; this is -just how you put a directory under revision control using the various -systems that ikiwiki supports. Note that the .ikiwiki subdirectory is -where ikiwiki keeps its state, and should be preserved, but not checked -into revision control. - -[[toggle id=subversion text="Subversion"]] -[[toggleable id=subversion text=""" - REPOSITORY=~/wikirepo - svnadmin create $REPOSITORY - svn mkdir file://$REPOSITORY/trunk -m "create trunk" - cd $SRCDIR - svn co file://$REPOSITORY/trunk . - svn add * - svn commit -m "initial import" -"""]] +There are lots of things you can configure to customize your wiki. +These range from changing the wiki's name, to enabling [[plugins]], +to banning users and locking pages. -[[toggle id=git text="Git"]] -[[toggleable id=git text=""" -When using Git, you probably want to set up two repositories, of which -one should be bare (meaning that it does not have a working tree -checked out). We call the bare repository the "repository" and the -other will be the "srcdir" (which `ikiwiki` uses to compile the wiki). -There are [other -ways](http://blog.madduck.net/vcs/2007.07.11_publishing-git-repositories) -to do the following, but this might be easiest: - - REPOSITORY=~/wiki.git - GIT_DIR=$REPOSITORY git --bare init --shared - cd $SRCDIR - git init - echo /.ikiwiki > .gitignore - git add . - git commit -m "initial commit" - git remote add origin $REPOSITORY - git config branch.master.merge refs/heads/master - git push --all - -It is **paramount** that you **never** push to the Git repository in -`$SRCDIR` ([this FAQ entry explains -why](http://git.or.cz/gitwiki/GitFaq#head-b6a3d85f677763313159eb39f7dbf4579d4ee28b)). -Instead, if you want to work on the wiki from a remote machine, clone -`$REPOSITORY`, using either the `git` transport (if available), or -`ssh`. - -If at any point you commit changes in `$SRCDIR`, make sure to `git -push` them to the `$REPOSITORY`. ikiwiki will do this automatically -for any changes made via the web. - -Finally, see [[Git_pitfalls]] if you experience problems. -"""]] +If you log in as the admin user you configured earlier, and go to +your Preferences page, you can click on "Wiki Setup" to customize many +wiki settings and plugins. -[[toggle id=tla text="TLA"]] -[[toggleable id=tla text=""" - REPOSITORY=~/wikirepo - tla make-archive me@localhost--wiki $REPOSITORY - tla my-id "" - cd $SRCDIR - tla archive-setup me@localhost--wiki/wiki--0 - tla init-tree me@localhost--wiki/wiki--0 - # Edit {arch}/=tagging-method and change the precious - # line to add the .ikiwiki directory to the regexp. - tla add * - tla import -"""]] +Some settings cannot be configured on the web, for security reasons or +because misconfiguring them could break the wiki. To change these settings, +you can manually edit the setup file, which is named something like +"foo.setup". The file lists all available configuration settings +and gives a brief description of each. -[[toggle id=mercurial text="Mercurial"]] -[[toggleable id=mercurial text=""" - REPOSITORY=$SRCDIR - hg init $REPOSITORY - cd $REPOSITORY - hg add * - hg commit -m "initial import" -"""]] +After making changes to this file, you need to tell ikiwiki to use it: -[[toggle id=monotone text="Monotone"]] -[[toggleable id=monotone text=""" - # These instructions are standard instructions to import a directory into monotone - # and set it up so that you don't need any passwords to use it - REPOSITORY=~/.ikiwiki/mtn.db - BRANCH=com.company.wikiname - # remember the password you use in the next step and - # substitute it for 'wikiKeyPass' in the get_passphrase() hook below - # note the you should never generate two monotone keys with the same name - mtn genkey web@machine.company.com - mtn db init --db=$REPOSITORY - mv $SRCDIR $SRCDIR-old - cd $SRCDIR-old - echo ".ikiwiki" > $SRCDIR-old/.mtn-ignore - mtn --db=$REPOSITORY --branch=$BRANCH import . -m "initial import" - cd .. - mtn --db=$REPOSITORY --branch=$BRANCH checkout $SRCDIR - mv $SRCDIR-old/.ikiwiki $SRCDIR - cat << EOF > $SRCDIR/_MTN/monotonerc - function get_passphrase (branchname) - return "wikiKeyPass" - end - EOF - rm -r $SRCDIR-old -"""]] + % ikiwiki -setup foo.setup -### 9. Configure ikiwiki to use revision control. +## Customizing file locations + +As a wiki compiler, ikiwiki builds a wiki from files in a source directory, +and outputs the files to a destination directory. The source directory is +a working copy checked out from the version control system repository. -Once your wiki is checked in to the revision control system, -you should configure ikiwiki to use revision control. Edit your -ikiwiki.setup, and uncomment the lines for the revision control system -you chose to use. Be sure to set `svnrepo` to $REPOSITORY, if using -subversion. Uncomment the block for the wrapper for your revision -control system, and configure the wrapper path in that block -appropriately (for Git, it should be `$REPOSITORY/hooks/post-update`). +When you used `auto.setup`, ikiwiki put the source directory, destination +directory, and repository in your home directory, and told you the location +of each. Those locations were chosen to work without customization, but you +might want to move them to different directories. + +First, move the destination directory and repository around. + + % mv public_html/foo /srv/web/foo.com + % mv foo.git /srv/git/foo.git + +If you moved the repository to a new location, checkouts pointing at the +old location won't work, and the easiest way to deal with this is to delete +them and re-checkout from the new repository location. + + % rm -rf foo + % git clone /src/git/foo.git -Once it's all set up, run `ikiwiki --setup ikiwiki.setup` once more. -Now you should be able to edit files in $SRCDIR, and use your revision -control system to commit them, and the wiki will automatically update. -And in the web interface, RecentChanges should work, and files changed -by web users will also be committed using revision control. +Finally, edit the setup file. Modify the settings for `srcdir`, `destdir`, +`url`, `cgiurl`, `cgi_wrapper`, `git_wrapper`, etc to reflect where +you moved things. Remember to run `ikiwiki -setup` after editing the +setup file. -### 10. Enjoy your new wiki! +## Enjoy your new wiki! Add yourself to [[IkiWikiUsers]]. And check out the [[tips]] to find out how to get more out of ikiwiki.