X-Git-Url: http://git.vanrenterghem.biz/git.ikiwiki.info.git/blobdiff_plain/58c77a01f79efaa5692fd30231695c6f8775a7d9..741b26aa176b34d0359a2b89dd6d8293fcdf2b3d:/doc/plugins/po.mdwn
diff --git a/doc/plugins/po.mdwn b/doc/plugins/po.mdwn
index ab7fcb725..919864ede 100644
--- a/doc/plugins/po.mdwn
+++ b/doc/plugins/po.mdwn
@@ -6,6 +6,8 @@ gettext, using [po4a](http://po4a.alioth.debian.org/).
It depends on the Perl `Locale::Po4a::Po` library (`apt-get install po4a`).
+[[!toc levels=2]]
+
Introduction
============
@@ -13,7 +15,7 @@ A language is chosen as the "master" one, and any other supported
language is a "slave" one.
A page written in the "master" language is a "master" page. It can be
-of any page type supported by ikiwiki, but PO. It does not have to be
+of any page type supported by ikiwiki, except `po`. It does not have to be
named a special way: migration to this plugin does not imply any page
renaming work.
@@ -22,7 +24,7 @@ English; if `usedirs` is enabled, it is rendered as
`bla/page/index.en.html`, else as `bla/page.en.html`.
Any translation of a "master" page into a "slave" language is called
-a "slave" page; it is written in the gettext PO format. PO is now
+a "slave" page; it is written in the gettext PO format. `po` is now
a page type supported by ikiwiki.
Example: `bla/page.fr.po` is the PO "message catalog" used to
@@ -56,9 +58,8 @@ The `po_translatable_pages` setting configures what pages are
translatable. It is a [[ikiwiki/PageSpec]], so you have lots of
control over what kind of pages are translatable.
-The PO translations files are anyway not considered as being
-translatable, so you don't need to worry about excluding them
-explicitly from this [[ikiwiki/PageSpec]].
+The `.po` files are not considered as being translatable, so you don't need to
+worry about excluding them explicitly from this [[ikiwiki/PageSpec]].
Internal links
--------------
@@ -128,6 +129,13 @@ Usage
Templates
---------
+When `po_link_to` is not set to `negotiated`, one should replace some
+occurrences of `BASEURL` with `HOMEPAGEURL` to get correct links to
+the wiki homepage.
+
+The `ISTRANSLATION` and `ISTRANSLATABLE` variables can be used to
+display things only on translatable or translation pages.
+
### Display page's versions in other languages
The `OTHERLANGUAGES` loop provides ways to display other languages'
@@ -163,49 +171,361 @@ The following variables are available inside the loop (for every page in):
The `PERCENTTRANSLATED` variable is set to the translation
completeness, expressed in percent, on "slave" pages.
+One can use it this way:
+
+
+--- /usr/share/perl5/Locale/Po4a/Common.pm 2008-07-21 14:54:52.000000000 -0400 ++++ Common.pm 2008-11-11 18:27:34.000000000 -0500 +@@ -30,8 +30,16 @@ + use strict; + use warnings; + +-BEGIN { +- if (eval { require Text::WrapI18N }) { ++sub import { ++ my $class=shift; ++ my $wrapi18n=1; ++ if ($_[0] eq 'nowrapi18n') { ++ shift; ++ $wrapi18n=0; ++ } ++ $class->export_to_level(1, $class, @_); ++ ++ if ($wrapi18n && eval { require Text::WrapI18N }) { + + # Don't bother determining the wrap column if we cannot wrap. + my $col=$ENV{COLUMNS}; +-Committing changes to a "master" page: +##### Term::ReadKey + +`Term::ReadKey` is not a hard dependency in our case, *i.e.* po4a +works nicely without it. But the po4a Debian package recommends +`libterm-readkey-perl`, so it will probably be installed on most +systems using the po plugin. + +If `$ENV{COLUMNS}` is not set, `Locale::Po4a::Common` uses +`Term::ReadKey::GetTerminalSize()` to get the terminal size. How safe +is this? + +Part of `Term::ReadKey` is written in C. Depending on the runtime +platform, this function use ioctl, environment, or C library function +calls, and may end up running the `resize` command (without +arguments). + +IMHO, using Term::ReadKey has too far reaching implications for us to +be able to guarantee anything wrt. security. Since it is anyway of no +use in our case, I suggest we define `ENV{COLUMNS}` before loading +`Locale::Po4a::Common`, just to be on the safe side. Joey? +[[--intrigeri]] + +> Update: adding an option to disable `Text::WrapI18N`, as Nicolas +> François suggested, would as a bonus disable `Term::ReadKey` +> as well. [[--intrigeri]] + +### msgmerge + +`refreshpofiles()` runs this external program. A po4a developer +answered he does "not expect any security issues from it". + +### Fuzzing input -1. updates the POT file and the PO files for the supported languages; - this is done in the `needsbuild` hook; **FIXME**: the updated PO - files must then be put under version control +I was not able to find any public information about gettext or po4a +having been tested with a fuzzing program, such as `zzuf` or `fusil`. +Moreover, some gettext parsers seem to be quite +[easy to crash](http://fusil.hachoir.org/trac/browser/trunk/fuzzers/fusil-gettext), +so it might be useful to bang msgmerge/po4a's heads against such +a program in order to easily detect some of the most obvious DoS. +[[--intrigeri]] -2. triggers a refresh of the corresponding HTML slave pages: this is - achieved by making any "slave" page dependent on the corresponding - "master" page, in the `needsbuild` hook. +> po4a was not fuzzy-tested, but according to one of its developers, +> "it would be really appreciated". [[--intrigeri]] + +Test conditions: + +- a 21M file containing 100 concatenated copies of all the files in my + `/usr/share/common-licenses/`; I had no existing PO file or + translated versions at hand, which renders these tests + quite incomplete. +- po4a was the Debian 0.34-2 package; the same tests were also run + after replacing the `Text` module with the CVS one (the core was not + changed in CVS since 0.34-2 was released), without any significant + difference in the results. +- Perl 5.10.0-16 + +#### po4a-gettextize + +`po4a-gettextize` uses more or less the same po4a features as our +`refreshpot` function. + +Without specifying an input charset, zzuf'ed `po4a-gettextize` quickly +errors out, complaining it was not able to detect the input charset; +it leaves no incomplete file on disk. + +So I had to pretend the input was in UTF-8, as does the po plugin. + +Two ways of crashing were revealed by this command-line: + + zzuf -vc -s 0:100 -r 0.1:0.5 \ + po4a-gettextize -f text -o markdown -M utf-8 -L utf-8 \ + -m LICENSES >/dev/null + +They are: + + Malformed UTF-8 character (UTF-16 surrogate 0xdcc9) in substitution iterator at /usr/share/perl5/Locale/Po4a/Po.pm line 1443. + Malformed UTF-8 character (fatal) at /usr/share/perl5/Locale/Po4a/Po.pm line 1443. + +and + + Malformed UTF-8 character (UTF-16 surrogate 0xdcec) in substitution (s///) at /usr/share/perl5/Locale/Po4a/Po.pm line 1443. + Malformed UTF-8 character (fatal) at /usr/share/perl5/Locale/Po4a/Po.pm line 1443. -Also, when the plugin has just been enabled, or when a page -has just been declared as being translatable: +Perl seems to exit cleanly, and an incomplete PO file is written on +disk. I not sure whether if this is a bug in Perl or in `Po.pm`. -- all the needed POT and PO files are be created -- **FIXME** the PO files must be checked into version control +> It's fairly standard perl behavior when fed malformed utf-8. As long as it doesn't +> crash ikiwiki, it's probably acceptable. Ikiwiki can do some similar things itself when fed malformed utf-8 (doesn't crash tho) --[[Joey]] -**FIXME** `refreshpofiles` uses `system()`, whose args have to be -checked more thoroughly to prevent any security issue (command -injection, etc.). +#### po4a-translate + +`po4a-translate` uses more or less the same po4a features as our +`filter` function. + +Without specifying an input charset, same behaviour as +`po4a-gettextize`, so let's specify UTF-8 as input charset as of now. + + zzuf -cv \ + po4a-translate -d -f text -o markdown -M utf-8 -L utf-8 \ + -k 0 -m LICENSES -p LICENSES.fr.po -l test.fr + +... prints tons of occurences of the following error, but a complete +translated document is written (obviously with some weird chars +inside): + + Use of uninitialized value in string ne at /usr/share/perl5/Locale/Po4a/TransTractor.pm line 854. + Use of uninitialized value in string ne at /usr/share/perl5/Locale/Po4a/TransTractor.pm line 840. + Use of uninitialized value in pattern match (m//) at /usr/share/perl5/Locale/Po4a/Po.pm line 1002. + +While: + + zzuf -cv -s 0:10 -r 0.001:0.3 \ + po4a-translate -d -f text -o markdown -M utf-8 -L utf-8 \ + -k 0 -m LICENSES -p LICENSES.fr.po -l test.fr + +... seems to lose the fight, at the `readpo(LICENSES.fr.po)` step, +against some kind of infinite loop, deadlock, or any similar beast. +It does not seem to eat memory, though. + +Whatever format module is used does not change anything. This is thus +probably a bug in po4a's core or in a lib it depends on. + +The sub `read`, in `TransTractor.pm`, seems to be a good debugging +starting point. + +#### msgmerge + +`msgmerge` is run in our `refreshpofiles` function. I did not manage +to crash it with `zzuf`. + +gettext/po4a rough corners +-------------------------- + +- fix infinite loop when synchronizing two ikiwiki (when checkouts + live in different directories): say bla.fr.po has been updated in + repo2; pulling repo2 from repo1 seems to trigger a PO update, that + changes bla.fr.po in repo1; then pushing repo1 to repo2 triggers + a PO update, that changes bla.fr.po in repo2; etc.; quickly fixed in + `629968fc89bced6727981c0a1138072631751fee`, by disabling references + in Pot files. Using `Locale::Po4a::write_if_needed` might be + a cleaner solution. (warning: this function runs the external + `diff` program, have to check security) +- new translations created in the web interface must get proper + charset/encoding gettext metadata, else the next automatic PO update + removes any non-ascii chars; possible solution: put such metadata + into the Pot file, and let it propagate; should be fixed in + `773de05a7a1ee68d2bed173367cf5e716884945a`, time will tell. + +Better links +------------ + +### Page title in links + +Using the fix to +[[bugs/pagetitle_function_does_not_respect_meta_titles]] from +[[intrigeri]]'s `meta` branch, the generated links' text is based on +the page titles set with the [[meta|plugins/meta]] plugin. This has to +be merged upstream, though. Translation quality assurance ----------------------------- @@ -219,40 +539,68 @@ A new `cansave` type of hook would be needed to implement this. Note: committing to the underlying repository is a way to bypass this check. -Translating online ------------------- +Creating new pages on the web +----------------------------- + +See [[contrib/po|contrib/po]]. + +Renaming/deleting pages +----------------------- + +Renaming or deleting a translation in the CGI should be forbidden. +Implementing this requires two new hooks: `canrename` and `canremove`, +that would be run respectively by the `rename` and the `remove` plugins. + +Robustness tests +---------------- + +### Disabling the plugin + +- enabling the plugin with `po_translatable_pages` set +- enabling the plugin without `po_translatable_pages` set: **OK** +- disabling the plugin: **OK** + +### Changing the plugin config + +- adding existing pages to `po_translatable_pages`: **OK** +- removing existing pages from `po_translatable_pages`: **OK** +- adding a language to `po_slave_languages`: **OK** +- removing a language from `po_slave_languages`: **OK** +- changing `po_master_language`: **OK** +- replacing `po_master_language` with a language previously part of + `po_slave_languages`: needs two rebuilds, but **OK** (this is quite + a perverse test actually) + +### Creating pages -As PO is a wiki page type, we already have an online PO editor, that -is ikiwiki's CGI. +- creating a master page via RCS: **OK** +- creating a master page via CGI: **OK** -A message-by-message interface could also be implemented at some -point; a nice way to do offline translation work (without VCS access) -still has to be offered, though. +### Deleting pages -Translating offline without VCS access --------------------------------------- +- removing a master page via RCS: **OK** +- removing a translation via RCS: **OK** +- removing a master page via CGI: **OK** +- removing a translation via CGI: **OK** -The following workflow should be made possible for translators without -VCS access who need to edit the PO files in another editor than a web -browser: +### Renaming pages -- download the page's PO file -- use any PO editor to update the translation -- upload the updated PO file +- renaming a master page via RCS: **OK** (but the old translations + are lost, because not all RCS track file renaming) +- renaming a master page and its translations via RCS: **OK** +- renaming a master page via CGI: **OK** +- renaming a translation via RCS +- renaming a translation via CGI -Implementation note: a generic mechanism to upload a page's source is -needed: it's only an alternative way to allow saving a the modified -page's source with the CGI. +### Misc -### Short-term workflow +- general test with `usedirs` disabled: **OK** +- general test with `indexpages` enabled +- general test with `po_link_to=default` -A possible workaround is: +Documentation +------------- -- pretend to edit the PO file online -- copy the PO file content from the textarea -- cancel the edit -- paste the content into a local file. -- edit the local file in any PO editor -- pretend to edit the PO file online -- paste the modified local file's content into the edit textarea -- save +Maybe write separate documentation depending on the people it targets: +translators, wiki administrators, hackers. This plugin may be complex +enough to deserve this.