if (!$pid) {
# In child.
- open STDERR, ">&STDOUT"
- or error("Cannot dup STDOUT: $!");
# Git commands want to be in wc.
chdir $config{srcdir}
or error("Cannot chdir to $config{srcdir}: $!");
close $OUT;
- ($error_handler || sub { })->("'@cmdline' failed: $!") if $?;
+ $error_handler->("'@cmdline' failed: $!") if $? && $error_handler;
return wantarray ? @lines : ($? == 0);
}
sub _merge_past ($$$) { #{{{
# Unlike with Subversion, Git cannot make a 'svn merge -rN:M file'.
# Git merge commands work with the committed changes, except in the
- # implicit case of '-m' of git-checkout(1). So we should invent a
+ # implicit case of '-m' of git checkout(1). So we should invent a
# kludge here. In principle, we need to create a throw-away branch
# in preparing for the merge itself. Since branches are cheap (and
# branching is fast), this shouldn't cost high.
# possible approach to get rid of this situation could be that we first
# make a temporary commit in the master branch and later restore the
# initial state (this is possible since Git has the ability to undo a
- # commit, i.e. 'git-reset --soft HEAD^'). The method can be summarized
+ # commit, i.e. 'git reset --soft HEAD^'). The method can be summarized
# as follows:
#
# - create a diff of HEAD:current-sha1
my $branch = "throw_away_${sha1}"; # supposed to be unique
# Create a throw-away branch and rewind backward.
- push @undo, sub { run_or_cry('git-branch', '-D', $branch) };
- run_or_die('git-branch', $branch, $sha1);
+ push @undo, sub { run_or_cry('git', 'branch', '-D', $branch) };
+ run_or_die('git', 'branch', $branch, $sha1);
# Switch to throw-away branch for the merge operation.
push @undo, sub {
- if (!run_or_cry('git-checkout', $config{gitmaster_branch})) {
- run_or_cry('git-checkout','-f',$config{gitmaster_branch});
+ if (!run_or_cry('git', 'checkout', $config{gitmaster_branch})) {
+ run_or_cry('git', 'checkout','-f',$config{gitmaster_branch});
}
};
- run_or_die('git-checkout', $branch);
+ run_or_die('git', 'checkout', $branch);
# Put the modified file in _this_ branch.
rename($hidden, $target)
or error("rename '$hidden' to '$target' failed: $!");
# _Silently_ commit all modifications in the current branch.
- run_or_non('git-commit', '-m', $message, '-a');
+ run_or_non('git', 'commit', '-m', $message, '-a');
# ... and re-switch to master.
- run_or_die('git-checkout', $config{gitmaster_branch});
+ run_or_die('git', 'checkout', $config{gitmaster_branch});
# Attempt to merge without complaining.
- if (!run_or_non('git-pull', '--no-commit', '.', $branch)) {
+ if (!run_or_non('git', 'pull', '--no-commit', '.', $branch)) {
$conflict = readfile($target);
- run_or_die('git-reset', '--hard');
+ run_or_die('git', 'reset', '--hard');
}
};
my $failure = $@;
$ci{ "${who}_epoch" } = $epoch;
$ci{ "${who}_tz" } = $tz;
- if ($name =~ m/^([^<]+) <([^@]+)/) {
+ if ($name =~ m/^([^<]+) <([^@>]+)/) {
my ($fullname, $username) = ($1, $2);
$ci{"${who}_fullname"} = $fullname;
$ci{"${who}_username"} = $username;
}
}
- debug("No 'tree' or 'parents' seen in diff-tree output")
- if !defined $ci{'tree'} || !defined $ci{'parents'};
+ debug("No 'tree' seen in diff-tree output") if !defined $ci{'tree'};
- $ci{'parent'} = @{ $ci{'parents'} }[0] if defined $ci{'parents'};
+ if (defined $ci{'parents'}) {
+ $ci{'parent'} = @{ $ci{'parents'} }[0];
+ }
+ else {
+ $ci{'parent'} = 0 x 40;
+ }
# Commit message.
while (my $line = shift @{ $dt_ref }) {
$num ||= 1;
- my @raw_lines =
- run_or_die('git-log', "--max-count=$num", '--pretty=raw', '--raw', '--abbrev=40', '--always', '-m', '-r', $sha1, '--', '.');
- my ($prefix) = run_or_die('git-rev-parse', '--show-prefix');
+ my @raw_lines = run_or_die('git', 'log', "--max-count=$num",
+ '--pretty=raw', '--raw', '--abbrev=40', '--always', '-c',
+ '-r', $sha1, '--', '.');
+ my ($prefix) = run_or_die('git', 'rev-parse', '--show-prefix');
my @ci;
while (my $parsed = _parse_diff_tree(($prefix or ""), \@raw_lines)) {
my $file = shift || q{--};
# Ignore error since a non-existing file might be given.
- my ($sha1) = run_or_non('git-rev-list', '--max-count=1', 'HEAD', $file);
+ my ($sha1) = run_or_non('git', 'rev-list', '--max-count=1', 'HEAD', $file);
if ($sha1) {
($sha1) = $sha1 =~ m/($sha1_pattern)/; # sha1 is untainted now
} else { debug("Empty sha1sum for '$file'.") }
sub rcs_update () { #{{{
# Update working directory.
- run_or_cry('git-pull', $config{gitorigin_branch});
+ if (length $config{gitorigin_branch}) {
+ run_or_cry('git', 'pull', $config{gitorigin_branch});
+ }
} #}}}
sub rcs_prepedit ($) { #{{{
# action. But it takes time for a Git process to finish its job
# (especially if a merge required), so we must re-lock to prevent
# race conditions. Only when the time of the real commit action
- # (i.e. git-push(1)) comes, we'll unlock the directory.
+ # (i.e. git push) comes, we'll unlock the directory.
lockwiki();
# Check to see if the page has been changed by someone else since
return $conflict if defined $conflict;
}
- # git-commit(1) returns non-zero if file has not been really changed.
+ # git commit returns non-zero if file has not been really changed.
# so we should ignore its exit status (hence run_or_non).
$message = possibly_foolish_untaint($message);
- if (run_or_non('git-commit', '-m', $message, '-i', $file)) {
+ if (run_or_non('git', 'commit', '-q', '-m', $message, '-i', $file)) {
unlockwiki();
- run_or_cry('git-push', $config{gitorigin_branch});
+ if (length $config{gitorigin_branch}) {
+ run_or_cry('git', 'push', $config{gitorigin_branch});
+ }
}
return undef; # success
my ($file) = @_;
- run_or_cry('git-add', $file);
+ run_or_cry('git', 'add', $file);
} #}}}
sub rcs_recentchanges ($) { #{{{
my @rets;
foreach my $ci (git_commit_info('HEAD', $num)) {
- my $title = @{ $ci->{'comment'} }[0];
+ my $title = join("\n", @{$ci->{'comment'}});
# Skip redundant commits.
next if ($title eq $dummy_commit_msg);
my (@pages, @messages);
foreach my $detail (@{ $ci->{'details'} }) {
- my $diffurl = $config{'diffurl'};
- my $file = $detail->{'file'};
+ my $file = $detail->{'file'};
+ my $diffurl = $config{'diffurl'};
$diffurl =~ s/\[\[file\]\]/$file/go;
$diffurl =~ s/\[\[sha1_parent\]\]/$ci->{'parent'}/go;
$diffurl =~ s/\[\[sha1_from\]\]/$detail->{'sha1_from'}/go;
when => $when,
message => [@messages],
pages => [@pages],
- };
+ } if @pages;
last if @rets >= $num;
}
#
# Here, we rely on a simple fact: we can extract all parts of the
# notification content by parsing the "HEAD" commit (which also
- # triggers a refresh of IkiWiki pages) and we can obtain the diff
- # by comparing HEAD and HEAD^ (the previous commit).
-
- my $sha1 = 'HEAD'; # the commit which triggers this action
+ # triggers a refresh of IkiWiki pages).
- my $ci = git_commit_info($sha1);
+ my $ci = git_commit_info('HEAD');
return if !defined $ci;
my @changed_pages = map { $_->{'file'} } @{ $ci->{'details'} };
$message = join "\n", @{ $ci->{'comment'} };
}
+ my $sha1 = $ci->{'sha1'};
+
require IkiWiki::UserInfo;
send_commit_mails(
sub {
$message;
},
sub {
- join "\n", run_or_die('git-diff', "${sha1}^", $sha1);
+ join "\n", run_or_die('git', 'diff', "${sha1}^", $sha1);
}, $user, @changed_pages
);
} #}}}
sub rcs_getctime ($) { #{{{
- # Get the ctime of file.
-
- my ($file) = @_;
+ my $file=shift;
+ # Remove srcdir prefix
+ $file =~ s/^\Q$config{srcdir}\E\/?//;
my $sha1 = git_sha1($file);
my $ci = git_commit_info($sha1);