+[[!meta date="2009-01-12 20:01:03 -0500"]]
+
It's common to name the [[cgi]] "ikiwiki.cgi", and put it somewhere
like `~/public_html/ikiwiki.cgi`, or `/var/www/wiki/ikiwiki.cgi`.
These instructions are for Debian systems, but the basic
configuration changes should work anywhere.
+[[!toc]]
+
## apache 2
-* Edit /etc/apache2/apache2.conf and add a line like this:
+* Make sure the cgi module is loaded. (Ie, `a2enmod cgi`).
+ Note that the cgid module will not work.
+
+* Edit /etc/apache2/apache2.conf (or /etc/apache2/mods-available/mime.conf)
+ and add a line like this:
AddHandler cgi-script .cgi
Or, if you've put it in a `~/public_html`, edit
`/etc/apache2/mods-available/userdir.conf`.
+* If your wiki is in `~/public_html` and does not appear when you enter the URL given by the installer, check that you have
+ the userdir mod enabled (there should be simlinks to userdir.load and userdir.conf in /etc/apache2/modes-enabled). If not,
+ run `a2enmod userdir` and reload apache2.
+
* You may also want to enable the [[plugins/404]] plugin.
To make apache use it, the apache config file will need a further
modification to make it use ikiwiki's CGI as the apache 404 handler.
ErrorDocument 404 /cgi-bin/ikiwiki.cgi
+* On Fedora (and RHEL, CentOS, and derivatives) you may need to change CGI mode from `06755` to `755` as suid/sgid bit is prohibited by `suexec`. ([Bug 1341568](https://bugzilla.redhat.com/show_bug.cgi?id=1341658))
+
## lighttpd
Here is how to enable cgi on [lighttpd](http://www.lighttpd.net/) and
## nginx
-* To run CGI under nginx, just use a FastCGI wrapper like [this one](http://technotes.1000lines.net/?p=23). The wrapper must be started somehow just like any other FastCGI program. I use launchd on OSX.
+To run CGI under nginx, you need to use a FastCGI wrapper. The wrapper must be started somehow just like any other FastCGI program. You can use launchd on OSX.
+
+In Linux, you will need the spawn-fcgi and fcgiwrap packages and start
+them with:
+
+ spawn-fcgi -s /tmp/fcgi.socket -n -- /usr/sbin/fcgiwrap
+
+This needs to be ran as your user. It can be added to `inittab` or
+made into a startup script in `init.d`. You may also need to make this file writable by the webserver, if that's running as a different user, e.g.:
+
+ chmod a+w /tmp/fcgi.socket
+
+If you have [systemd](https://en.wikipedia.org/wiki/Systemd), you may use a service file like so:
+
+Edit/create a service file (in Debian it would be: `sudo vim /lib/systemd/system/ikiwiki.service`
+
+Content of `ikiwiki.service`:
+
+ [Unit]
+ Description=Ikiwiki fcgi socket wrap
+ After=network.target
+
+ [Service]
+ Type=simple
+ User=www-data
+ Group=www-data
+ ExecStart=/usr/bin/spawn-fcgi -s /tmp/fcgi.socket -n -- /usr/sbin/fcgiwrap
+
+ [Install]
+ WantedBy=multi-user.target
+
+Then run:
+
+ # This enables the service at startup
+ sudo systemctl enable ikiwiki.service
+ # This attempts to start the service
+ sudo systemctl start ikiwiki.service
+
+Then you need an nginx config plugged in that wrapper. Here's an
+example virtual host configuration:
+
+ server {
+ #listen 80; ## listen for ipv4; this line is default and implied
+ #listen [::]:80 default_server ipv6only=on; ## listen for ipv6
+
+ root /home/anarcat/public_html/wiki.reseaulibre.ca/;
+ index index.html index.htm;
+
+ # Make site accessible from http://localhost/
+ server_name wiki.reseaulibre.ca;
+
+ location / {
+ try_files $uri $uri/ /index.html;
+ }
+ location /ikiwiki.cgi {
+ fastcgi_pass unix:/tmp/fcgi.socket;
+ fastcgi_index ikiwiki.cgi;
+ fastcgi_param SCRIPT_FILENAME /home/anarcat/public_html/ikiwiki.cgi;
+ fastcgi_param DOCUMENT_ROOT /home/anarcat/public_html/wiki.reseaulibre.ca;
+ include /etc/nginx/fastcgi_params;
+ }
+ }
+
+Also, note that the `/tmp/fcgi.socket` file needs to be writable by the webserver. I am also unsure as to the security of this setup, as I am using this only on my dev server. Needless to say that [[real fastcgi support|todo/fastcgi_or_modperl_installation_instructions]] would be great. ;) --[[anarcat]]
+
+2016-09-23 [[alexjj]]: On Debian Jessie creating the fcgi ikiwiki.service is not necessary. Install fcgiwrap, it'll auto start the fcgiwrap systemd service and then add the parameters in the virtual host:
+
+ location / {
+ try_files $uri $uri/ =404;
+ }
+
+ # Max size of file upload
+ client_max_body_size 10m;
+
+ location ~ .cgi {
+ #gzip off is recommended in /usr/share/doc/fcgiwrap/README.Debian
+ gzip off;
+ fastcgi_pass unix:/var/run/fcgiwrap.socket;
+ include /etc/nginx/fastcgi_params;
+ }
+
+Here's a [[complete site.conf|tips/nginx]] for nginx if that helps.
## boa