-> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki
-> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere
-> more sensible. [[Chris]]
-
-* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to
-my local settings. There are no errors but neither does anything get compiled. An ikiwiki
-command to explicitly do the compile works fine. Am I misunderstanding something here?
-
-> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild.
-> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything
-either though it was the command line I originally used to compile. After a long interval I 'touch'ed
-the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused!
-
-> ikiwiki only compiles files whose modification times have changed. It
-> should see any change made as close as a second after the last compile.
-> When run with --setup, ikiwiki always rebuilds every file in the wiki. If
-> --setup is not working, you must have it pointed at the wrong path or
-> something; you can pass -v to see what it's doing. I don't know why it
-> would not see recently changed files; you could try stracing it.
-> --[[Joey]]
+----
+
+# Installation of selected docs (html)
+
+The latest release has around 560 files (over 2MB) in html.
+
+Any suggestions or ideas on limiting what html is installed?
+
+For example, I don't see value in every ikiwiki install out there to also install personal "users" ikiwiki pages.
+
+For now I copy ikiwiki.setup. And then use pax with -L switch to copy the targets of the symlinks of the basewiki.
+
+I was thinking of making a list of desired documents from the html directory to install.
+
+--JeremyReed
+
+> You don't need any of them, unless you want to read ikiwiki's docs locally.
+>
+> I don't understand why you're installing the basewiki files manually;
+> ikiwiki has a Makefile that will do this for you. --[[Joey]]
+
+>> The Makefile's install doesn't do what I want so I use different installer for it.
+>> It assumes wrong location for man pages for me. (And it should consider using INSTALLVENDORMAN1DIR and
+>> MAN1EXT but I don't know about section 8 since I don't know of perl value for that.)
+>> I don't want w3m cgi installed; it is optional for my package.
+>> I will just patch for that instead of using my own installer.
+>> Note: I am working on the pkgsrc package build specification for this. This is for creating
+>> packages for NetBSD, DragonFly and other systems that use pkgsrc package system.
+>> --JeremyReed
+
+----
+
+# Upgrade steps
+
+I upgrades from 1.40 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration.
+I had many errors like:
+
+ /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+and:
+
+ failed renaming /home/bsdwiki/www/wiki/smileys.ikiwiki-new to /home/bsdwiki/www/wiki/smileys: Is a directory
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+Probably about six errors like this. I worked around this by removing the files and directories it complained about.
+Finally it finished.
+
+> As of version 2.0, ikiwiki enables usedirs by default. See
+> [[tips/switching_to_usedirs]] for details. --[[Joey]]
+
+>> I read the config wrong. I was thinking that it showed the defaults even though commented out
+>> (like ssh configs do). I fixed that part. --JeremyReed
+
+My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt
+me for a password but now just goes right into the "editing" mode.
+The release notes for 2.0 say password auth is still on by default.
+
+> It sounds like you have the anonok plugin enabled?
+
+>> Where is the default documented? My config doesn't have it uncommented.
+
+The third problem is that when editing my textbox is empty -- no content.
+
+This is using my custom rcs.pm which has been used thousands of times.
+
+> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I
+> fixed a bug that could result in the edit box always being empty back in
+> version 2.3. The only other way it could happen is if ikiwiki does not
+> have saved state about the page that it's editing (in .ikiwiki/index).
+
+>> Rebuilt it several times. Now that I think of it, I think my early problem of having
+>> no content in the textbox was before I rebuilt the cgi. And after I rebuilt the whole webpage was empty.
+
+Now I regenerated my ikiwiki.cgi again (no change to my configuration,
+and I just get an empty HTML page when attempting editing or "create".
+
+> If the page is completly empty then ikiwiki is crashing before it can
+> output anything, though this seems unlikely. Check the webserver logs.
+
+Now I see it created directories for my data. I fixed that by setting
+usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup
+but I still have empty pages for editing (no textbox no html at all).
+
+> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]]
+
+>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-"
+>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes).
+
+>>> You need to either figure out what your web server does with stderr
+>>> from cgi programs, or run ikiwiki.cgi at the command line with an
+>>> appropriate environment so it thinks it's being called from a web
+>>> server, so you can see how it's failing. --[[Joey]]
+
+(I am posting this now, but will do some research and post some more.)
+
+Is there any webpage with upgrade steps?
+
+> Users are expected to read [[news]], which points out any incompatible
+> changes or cases where manual action is needed.
+
+>> I read it but read the usedirs option wrong :(.
+>> Also it appears to be missing the news from between 1.40 to 2.0 unless they dont' exist.
+>> If they do exist maybe they have release notes I need?
+
+>>> All the old ones are in the NEWS file. --[[Joey]]
+
+--JeremyReed
+
+My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me.
+
+Also I forgot to mention that do=recentchanges works good for me. It uses my
+rcs_recentchanges in my rcs perl module.
+
+The do=prefs does nothing though -- just a blank webpage.
+
+> You need to figure out why ikiwiki is crashing. The webserver logs should
+> tell you.
+
+I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI.
+I was hoping for some output.
+
+I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes
+on changes to revision control modules. Has something changed? I will also look.
+
+> No, the rcs interface has not needed to change in a long time. Also,
+> nothing is done with the rcs for do=prefs.
+
+>> Thanks. I also checked differences between 1.40 Rcs plugins and didn't notice anything significant.
+
+--JeremyReed
+
+Another Followup: I created a new ikiwiki configuration and did the --setup to
+create an entirely different website. I have same problem there. No prompt for password
+and empty webpage when using the cgi.
+I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know.
+
+The only errors I see when building and installing ikiwiki are:
+
+ Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66.
+
+ gettext 0.14 too old, not updating the pot file