-ikiwiki [[plugins]] are written in perl. Each plugin is a perl module, in
-the `IkiWiki::Plugin` namespace. The name of the plugin is typically in
-lowercase, such as `IkiWiki::Plugin::inline`. Ikiwiki includes a
-`IkiWiki::Plugin::skeleton` that can be fleshed out to make a useful
-plugin. `IkiWiki::Plugin::pagecount` is another simple example.
+Ikiwiki's plugin interface allows all kinds of useful [[plugins]] to be
+written to extend ikiwiki in many ways. Despite the length of this page,
+it's not really hard. This page is a complete reference to everything a
+plugin might want to do. There is also a quick [[tutorial]].
-## Note
+[[toc levels=2]]
+
+## Types of plugins
+
+Most ikiwiki [[plugins]] are written in perl, like ikiwiki. This gives the
+plugin full access to ikiwiki's internals, and is the most efficient.
+However, plugins can actually be written in any language that supports XML
+RPC. These are called [[external]] plugins.
+
+A plugin written in perl is a perl module, in the `IkiWiki::Plugin`
+namespace. The name of the plugin is typically in lowercase, such as
+`IkiWiki::Plugin::inline`. Ikiwiki includes a `IkiWiki::Plugin::skeleton`
+that can be fleshed out to make a useful plugin.
+`IkiWiki::Plugin::pagecount` is another simple example. All perl plugins
+should `use IkiWiki` to import the ikiwiki plugin interface. It's a good
+idea to include the version number of the plugin interface that your plugin
+expects: `use IkiWiki 2.00`.
+
+An external plugin is an executable program. It can be written in any
+language. Its interface to ikiwiki is via XML RPC, which it reads from
+ikiwiki on its standard input, and writes to ikiwiki on its standard
+output. For more details on writing external plugins, see [[external]].
+
+Despite these two types of plugins having such different interfaces,
+they're the same as far as how they hook into ikiwiki. This document will
+explain how to write both sorts of plugins, albeit with an emphasis on perl
+plugins.
+
+## Considerations
One thing to keep in mind when writing a plugin is that ikiwiki is a wiki
*compiler*. So plugins influence pages when they are built, not when they
## Registering plugins
-Plugins should, when imported, call IkiWiki::register_plugin to hook into
-ikiwiki. The function takes four parameters:
+Plugins should, when imported, call `hook()` to hook into ikiwiki's
+processing. The function uses named parameters, and use varies depending on
+the type of hook being registered -- see below. Note that a plugin can call
+the function more than once to register multiple hooks. All calls to
+`hook()` should be passed a "type" parameter, which gives the type of
+hook, a "id" paramter, which should be a unique string for this plugin, and
+a "call" parameter, which tells what function to call for the hook.
+
+An optional "last" parameter, if set to a true value, makes the hook run
+after all other hooks of its type. Useful if the hook depends on some other
+hook being run first.
+
+## Types of hooks
+
+In roughly the order they are called.
+
+### getopt
+
+ hook(type => "getopt", id => "foo", call => \&getopt);
+
+This allows for plugins to perform their own processing of command-line
+options and so add options to the ikiwiki command line. It's called during
+command line processing, with @ARGV full of any options that ikiwiki was
+not able to process on its own. The function should process any options it
+can, removing them from @ARGV, and probably recording the configuration
+settings in %config. It should take care not to abort if it sees
+an option it cannot process, and should just skip over those options and
+leave them in @ARGV.
+
+### checkconfig
+
+ hook(type => "checkconfig", id => "foo", call => \&checkconfig);
+
+This is useful if the plugin needs to check for or modify ikiwiki's
+configuration. It's called early in the startup process. The
+function is passed no values. It's ok for the function to call
+`error()` if something isn't configured right.
+
+### needsbuild
+
+ hook(type => "needsbuild", id => "foo", call => \&needsbuild);
+
+This allows a plugin the manipulate the list of files that need to be
+built when the wiki is refreshed. The function is passed a reference to an
+array of pages that will be rebuilt, and can modify the array, either
+adding or removing files from it.
+
+### filter
+
+ hook(type => "filter", id => "foo", call => \&filter);
+
+Runs on the raw source of a page, before anything else touches it, and can
+make arbitrary changes. The function is passed named parameters "page",
+"destpage", and "content". It should return the filtered content.
+
+### preprocess
+
+Adding a [[ikiwiki/PreProcessorDirective]] is probably the most common use
+of a plugin.
+
+ hook(type => "preprocess", id => "foo", call => \&preprocess);
+
+Replace "foo" with the command name that will be used inside brackets for
+the preprocessor directive.
+
+Each time the directive is processed, the referenced function (`preprocess`
+in the example above) is called, and is passed named parameters. A "page"
+parameter gives the name of the page that embedded the preprocessor
+directive, while a "destpage" parameter gives the name of the page the
+content is going to (different for inlined pages), and a "preview"
+parameter is set to a true value if the page is being previewed. All
+parameters included in the directive are included as named parameters as
+well. Whatever the function returns goes onto the page in place of the
+directive.
+
+An optional "scan" parameter, if set to a true value, makes the hook be
+called during the preliminary scan that ikiwiki makes of updated pages,
+before begining to render pages. This parameter should be set to true if
+the hook modifies data in `%links`. Note that doing so will make the hook
+be run twice per page build, so avoid doing it for expensive hooks.
+
+Note that if the [[htmlscrubber]] is enabled, html in
+[[ikiwiki/PreProcessorDirective]] output is sanitised, which may limit what
+your plugin can do. Also, the rest of the page content is not in html
+format at preprocessor time. Text output by a preprocessor directive will
+be linkified and passed through markdown (or whatever engine is used to
+htmlize the page) along with the rest of the page.
+
+### htmlize
+
+ hook(type => "htmlize", id => "ext", call => \&htmlize);
+
+Runs on the raw source of a page and turns it into html. The id parameter
+specifies the filename extension that a file must have to be htmlized using
+this plugin. This is how you can add support for new and exciting markup
+languages to ikiwiki.
+
+The function is passed named parameters: "page" and "content" and should
+return the htmlized content.
+
+### pagetemplate
+
+ hook(type => "pagetemplate", id => "foo", call => \&pagetemplate);
+
+[[Templates|wikitemplates]] are filled out for many different things in
+ikiwiki, like generating a page, or part of a blog page, or an rss feed, or
+a cgi. This hook allows modifying the variables available on those
+templates. The function is passed named parameters. The "page" and
+"destpage" parameters are the same as for a preprocess hook. The "template"
+parameter is a [[cpan HTML::Template]] object that is the template that
+will be used to generate the page. The function can manipulate that
+template object.
+
+The most common thing to do is probably to call `$template->param()` to add
+a new custom parameter to the template.
+
+### templatefile
+
+ hook(type => "templatefile", id => "foo", call => \&templatefile);
+
+This hook allows plugins to change the [[template|wikitemplates]] that is
+used for a page in the wiki. The hook is passed a "page" parameter, and
+should return the name of the template file to use, or undef if it doesn't
+want to change the default ("page.tmpl"). Template files are looked for in
+/usr/share/ikiwiki/templates by default.
+
+### sanitize
+
+ hook(type => "sanitize", id => "foo", call => \&sanitize);
+
+Use this to implement html sanitization or anything else that needs to
+modify the body of a page after it has been fully converted to html.
+
+The function is passed named parameters: "page" and "content", and
+should return the sanitized content.
+
+### format
+
+ hook(type => "format", id => "foo", call => \&format);
+
+The difference between format and sanitize is that sanitize only acts on
+the page body, while format can modify the entire html page including the
+header and footer inserted by ikiwiki, the html document type, etc.
+
+The function is passed named parameters: "page" and "content", and
+should return the formatted content.
+
+### delete
+
+ hook(type => "delete", id => "foo", call => \&delete);
+
+Each time a page or pages is removed from the wiki, the referenced function
+is called, and passed the names of the source files that were removed.
+
+### change
+
+ hook(type => "change", id => "foo", call => \&render);
+
+Each time ikiwiki renders a change or addition (but not deletion) to the
+wiki, the referenced function is called, and passed the names of the
+source files that were rendered.
+
+### cgi
+
+ hook(type => "cgi", id => "foo", call => \&cgi);
+
+Use this to hook into ikiwiki's cgi script. Each registered cgi hook is
+called in turn, and passed a CGI object. The hook should examine the
+parameters, and if it will handle this CGI request, output a page (including the http headers) and
+terminate the program.
+
+### auth
+
+ hook(type => "auth", id => "foo", call => \&auth);
+
+This hook can be used to implement a different authentication method than
+the standard web form. When a user needs to be authenticated, each registered
+auth hook is called in turn, and passed a CGI object and a session object.
+
+If the hook is able to authenticate the user, it should set the session
+object's "name" parameter to the authenticated user's name. Note that
+if the name is set to the name of a user who is not registered,
+a basic registration of the user will be automatically performed.
+
+### sessioncgi
+
+ hook(type => "sessioncgi", id => "foo", call => \&sessioncgi);
+
+Unlike the cgi hook, which is run as soon as possible, the sessioncgi hook
+is only run once a session object is available. It is passed both a CGI
+object and a session object. To check if the user is in fact signed in, you
+can check if the session object has a "name" parameter set.
+
+### canedit
+
+ hook(type => "canedit", id => "foo", call => \&pagelocked);
+
+This hook can be used to implement arbitrary access methods to control when
+a page can be edited using the web interface (commits from revision control
+bypass it). When a page is edited, each registered canedit hook is called
+in turn, and passed the page name, a CGI object, and a session object.
+
+If edit can proceed, the hook should return "". If the edit is not allowed
+by this hook, the hook should return an error message for the user to see.
+If the hook has no opinion about whether the edit can proceed, return
+`undef`, and the next plugin will be asked to decide.
+
+### editcontent
+
+ hook(type => "editcontent", id => "foo", call => \&editcontent);
+
+This hook is called when a page is saved (or previewed) using the web
+interface. It is passed named parameters: `content`, `page`, `cgi`, and
+`session`. These are, respectively, the new page content as entered by the
+user, the page name, a `CGI` object, and the user's `CGI::Session`.
+
+It can modify the content as desired, and should return the content.
+
+### formbuilder
+
+ hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
+ hook(type => "formbuilder", id => "foo", call => \&formbuilder);
+
+These hooks allow tapping into the parts of ikiwiki that use [[cpan
+CGI::FormBuilder]] to generate web forms. These hooks are passed named
+parameters: `cgi`, `session`, `form`, and `buttons`. These are, respectively,
+the `CGI` object, the user's `CGI::Session`, a `CGI::FormBuilder`, and a
+reference to an array of names of buttons to go on the form.
-1. A method type. Use "preprocess" to register a [[PreProcessorDirective]]
-2. A command name. This is the bit that will appear inside brackets in a
- page.
-3. A reference to a subroutine that is run when the plugin is used.
+Each time a form is set up, the `formbuilder_setup` hook is called.
+Typically the `formbuilder_setup` hook will check the form's title, and if
+it's a form that it needs to modify, will call various methods to
+add/remove/change fields, tweak the validation code for the fields, etc. It
+will not validate or display the form.
-## Writing a [[PreProcessorDirective]]
+Just before a form is displayed to the user, the `formbuilder` hook is
+called. It can be used to validate the form, but should not display it.
-For preprocessor directives, the subroutine is passed named parameters. A
-"page" parameter gives the name of the page that embedded the preprocessor directive. All parameters included in the directive are included
-as named parameters as well. Whatever the subroutine returns goes onto the
-page in place of the directive.
+### savestate
-## Error handing in plugins
+ hook(type => "savestate", id => "foo", call => \&savestate);
-While a plugin can call ikiwiki's error routine for a fatal error, for
-errors that aren't intended to halt the entire wiki build, including bad
-parameters passed to a [[PreProcessorDirective]], etc, it's better to just
-return the error message as the output of the plugin.
+This hook is called wheneven ikiwiki normally saves its state, just before
+the state is saved. The function can save other state, modify values before
+they're saved, etc.
-## Html issues
+## Plugin interface
-Note that if [[HTMLSanitization]] is enabled, html in
-[[PreProcessorDirective]] output is sanitised, which may limit what your
-plugin can do. Also, the rest of the page content is not in html format at
-preprocessor time. Text output by a preprocessor directive will be passed through markdown along with the rest of the page.
+To import the ikiwiki plugin interface:
-## Wiki configuration
+ use IkiWiki '1.00';
-A plugin can access the wiki's configuration via the `%IkiWiki::config` hash.
-The best way to understand the contents of the hash is to look at
+This will import several variables and functions into your plugin's
+namespace. These variables and functions are the ones most plugins need,
+and a special effort will be made to avoid changing them in incompatible
+ways, and to document any changes that have to be made in the future.
+
+Note that IkiWiki also provides other variables and functions that are not
+exported by default. No guarantee is made about these in the future, so if
+it's not exported, the wise choice is to not use it.
+
+### %config
+
+A plugin can access the wiki's configuration via the `%config`
+hash. The best way to understand the contents of the hash is to look at
[[ikiwiki.setup]], which sets the hash content to configure the wiki.
-## Wiki data
+### %pagestate
+
+The `%pagestate` hash can be used by plugins to save state that they will need
+next time ikiwiki is run. The hash holds per-page state, so to set a value,
+use `%pagestate{$page}{$id}{$key}=$value`, and to retrieve the value,
+use `%pagestate{$page}{$id}{$key}`.
+
+`$key` can be any string you like, but `$id` must be the same as the "id"
+parameter passed to `hook()` when registering the plugin. This is so
+ikiwiki can know when to delete pagestate for plugins that are no longer
+used.
+
+When pages are deleted, ikiwiki automatically deletes their pagestate too.
+
+### Other variables
If your plugin needs to access data about other pages in the wiki. It can
use the following hashes, using a page name as the key:
-* `%IkiWiki::links` lists the names of each page
- that a page links to, in an array reference.
-* `%IkiWiki::pagemtime` contains the last modification time of each page
-* `%IkiWiki::pagectime` contains the creation time of each page`
-* `%IkiWiki::renderedfiles` contains the name of the file rendered by a
- page
-* `%IkiWiki::pagesources` contains the name of the source file for a page.
-* `%IkiWiki::depends` contains a [[GlobList]] that is used to specify other
- pages that a page depends on. If one of its dependencies is updated, the
- page will also get rebuilt.
-
- Many plugins will need to add dependencies to this hash; the best way to do
- it is by using the IkiWiki::add_depends function, which takes as its
- parameters the page name and a [[GlobList]] of dependencies to add.
+* `%links` lists the names of each page that a page links to, in an array
+ reference.
+* `%destsources` contains the name of the source file used to create each
+ destination file.
+* `%pagesources` contains the name of the source file for each page.
+
+Also, the %IkiWiki::version variable contains the version number for the
+ikiwiki program.
+
+### Library functions
+
+#### `hook(@)`
+
+Hook into ikiwiki's processing. See the discussion of hooks above.
+
+Note that in addition to the named parameters described above, a parameter
+named `no_override` is supported, If it's set to a true value, then this hook
+will not override any existing hook with the same id. This is useful if
+the id can be controled by the user.
+
+#### `debug($)`
+
+Logs a debugging message. These are supressed unless verbose mode is turned
+on.
+
+#### `error($;$)`
+
+Aborts with an error message. If the second parameter is passed, it is a
+function that is called after the error message is printed, to do any final
+cleanup.
+
+Note that while any plugin can use this for a fatal error, plugins should
+try to avoid dying on bad input, as that will halt the entire wiki build
+and make the wiki unusable. So for example, if a
+[[ikiwiki/PreProcessorDirective]] is passed bad parameters, it's better to
+return an error message, which can appear on the wiki page, rather than
+calling error().
+
+#### `template($;@)`
+
+Creates and returns a [[cpan HTML::Template]] object. The first parameter
+is the name of the file in the template directory. The optional remaining
+parameters are passed to `HTML::Template->new`.
+
+#### `htmlpage($)`
+
+Passed a page name, returns the base name that will be used for a the html
+page created from it. (Ie, it appends ".html".)
+
+#### `add_depends($$)`
+
+Makes the specified page depend on the specified [[ikiwiki/PageSpec]].
+
+#### `pagespec_match($$;@)`
+
+Passed a page name, and [[ikiwiki/PageSpec]], returns true if the
+[[ikiwiki/PageSpec]] matches the page.
+
+Additional named parameters can be passed, to further limit the match.
+The most often used is "location", which specifies the location the
+PageSpec should match against. If not passed, relative PageSpecs will match
+relative to the top of the wiki.
+
+#### `bestlink($$)`
+
+Given a page and the text of a link on the page, determine which
+existing page that link best points to. Prefers pages under a
+subdirectory with the same name as the source page, failing that
+goes down the directory tree to the base looking for matching
+pages, as described in [[ikiwiki/SubPage/LinkingRules]].
+
+#### `htmllink($$$;@)`
+
+Many plugins need to generate html links and add them to a page. This is
+done by using the `htmllink` function. The usual way to call
+`htmlllink` is:
+
+ htmllink($page, $page, $link)
+
+Why is `$page` repeated? Because if a page is inlined inside another, and a
+link is placed on it, the right way to make that link is actually:
+
+ htmllink($page, $destpage, $link)
+
+Here `$destpage` is the inlining page. A `destpage` parameter is passed to
+some of the hook functions above; the ones that are not passed it are not used
+during inlining and don't need to worry about this issue.
+
+After the three required parameters, named parameters can be used to
+control some options. These are:
+
+* noimageinline - set to true to avoid turning links into inline html images
+* forcesubpage - set to force a link to a subpage
+* linktext - set to force the link text to something
+* anchor - set to make the link include an anchor
+* rel - set to add a rel attribute to the link
+* class - set to add a css class to the link
+
+#### `readfile($;$)`
+
+Given a filename, reads and returns the entire file.
+
+The optional second parameter, if set to a true value, makes the file be read
+in binary mode.
+
+A failure to read the file will result in it dying with an error.
+
+#### `writefile($$$;$$)`
+
+Given a filename, a directory to put it in, and the file's content,
+writes a file.
+
+The optional fourth parameter, if set to a true value, makes the file be
+written in binary mode.
+
+The optional fifth parameter can be used to pass a function reference that
+will be called to handle writing to the file. The function will be called
+and passed a file descriptor it should write to, and an error recovery
+function it should call if the writing fails. (You will not normally need to
+use this interface.)
+
+A failure to write the file will result in it dying with an error.
+
+If the destination directory doesn't exist, it will first be created.
+
+#### `will_render($$)`
+
+Given a page name and a destination file name (not including the base
+destination directory), register that the page will result in that file
+being rendered. It's important to call this before writing to any file in
+the destination directory.
+
+Ikiwiki uses this information to automatically clean up rendered files when
+the page that rendered them goes away or is changes to no longer render
+them. will_render also does a few important security checks.
+
+#### `pagetype($)`
+
+Given the name of a source file, returns the type of page it is, if it's
+a type that ikiwiki knowns how to htmlize. Otherwise, returns undef.
+
+#### `pagename($)`
+
+Given the name of a source file, returns the name of the wiki page
+that corresponds to that file.
+
+#### `srcfile($)`
+
+Given the name of a source file in the wiki, searches for the file in
+the source directory and the underlay directories (most recently added
+underlays first), and returns the full path to the first file found.
+
+#### `add_underlay($)`
+
+Adds a directory to the set of underlay directories that ikiwiki will
+search for files.
+
+If the directory name is not absolute, ikiwiki will assume it is in
+the parent directory of the configured underlaydir.
+
+#### `displaytime($;$)`
+
+Given a time, formats it for display.
+
+The optional second parameter is a strftime format to use to format the
+time.
+
+#### `gettext`
+
+This is the standard gettext function, although slightly optimised.
+
+#### `urlto($$)`
+
+Construct a relative url to the first parameter from the page named by the
+second. The first parameter can be either a page name, or some other
+destination file, as registered by `will_render`.
+
+#### `targetpage($$)`
+
+Passed a page and an extension, returns the filename that page will be
+rendered to.
+
+## RCS plugins
+
+ikiwiki's support for [[revision_control_systems|rcs]] also uses pluggable
+perl modules. These are in the `IkiWiki::RCS` namespace, for example
+`IkiWiki::RCS::svn`.
+
+Each RCS plugin must support all the `IkiWiki::rcs_*` functions.
+See IkiWiki::RCS::Stub for the full list of functions. It's ok if
+`rcs_getctime` does nothing except for throwing an error.
+
+See [[RCS_details|rcs/details]] for some more info.
+
+## PageSpec plugins
+
+It's also possible to write plugins that add new functions to
+[[PageSpecs|ikiwiki/PageSpec]]. Such a plugin should add a function to the
+IkiWiki::PageSpec package, that is named `match_foo`, where "foo()" is
+how it will be accessed in a [[ikiwiki/PageSpec]]. The function will be passed
+two parameters: The name of the page being matched, and the thing to match
+against. It may also be passed additional, named parameters. It should return
+a IkiWiki::SuccessReason object if the match succeeds, or an
+IkiWiki::FailReason object if the match fails.