+Found a further complication in presence dependencies. Map now uses
+presence dependencies when adding its explicit dependencies on pages. But
+this defeats the purpose of the explicit dependencies! Because, now,
+when B is changed to not match a pagespec, the A's presence dep does
+not fire.
+
+I didn't think things through when switching it to use presence
+dependencies there. But, if I change it to use full dependencies, then all
+the work that was done to allow map to use presence dependencies for its
+main pagespec is for naught. The map will once again have to update
+whenever *any* content of the page changes.
+
+This points toward the conclusion that explicit dependencies, however they
+are added, are not the right solution at all. Some other approach, such as
+maintaining the list of pages that match a dependency, and noticing when it
+changes, is needed.
+
+----
+
+### pagespec influence lists
+
+I'm using this term for the concept of a list of pages whose modification
+can indirectly influence what pages a pagespec matches.
+
+> Trying to make a formal definition of this: (Note, I'm using the term sets rather than lists, but they're roughly equivalent)
+>
+> * Let the *matching set* for a pagespec be the set of existing pages that the pagespec matches.
+> * Let a *influence set* for a pagespec be the set of all pages, *p*, whose alteration might:
+> * cause the pagespec to include or exclude a page other than *p*, or
+> * cause the pagespec to exclude *p*.
+>
+>> \[Will snipped some stuff and edited the formal definition]
+>
+> --[[Will]]
+
+>> I appreciate the formalism!
+>>
+>> Only existing pages need to be in these sets, because if a page is added
+>> in the future, the existing dependency code will always test to see
+>> if it matches. So it will be in the maching set (or not) at that point.
+>>
+>>> Hrm, I agree with you in general, but I think I can come up with nasty counter-examples. What about a pagespec
+>>> of "!backlink(bogus)" where the page bogus doesn't exist? In this case, the page 'bogus' needs to be in the influence
+>>> set even though it doesn't exist.
+>>>
+>>>> I think you're right, this is a case that the current code is not
+>>>> handling. Actually, I made all the pagespecs return influences
+>>>> even if the influence was not present or did not match. But, it
+>>>> currently only records influences as dependencies when a pagespec
+>>>> successfully matches. Now I'm sure that is wrong, and I've removed
+>>>> that false optimisation. I've updated some of the below. --[[Joey]]
+>>>
+>>> Also, I would really like the formalism to include the whole dependency system, not just any additions to it. That will make
+>>> the whole thing much easier to reason about.
+>>
+>> The problem with your definition of direct influence set seems to be
+>> that it doesn't allow `link()` and `title()` to have as an indirect
+>> influence, the page that matches. But I'm quite sure we need those.
+>> --[[Joey]]
+
+>>> I see what you mean. Does the revised definition capture this effectively?
+>>> The problem with this revised definition is that it still doesn't match your examples below.
+>>> My revised definition will include pretty much all currently matching pages to be in the influence list
+>>> because deletion of any of them would cause a change in which pages are matched - the removal problem.
+>>> -- [[Will]]
+
+#### Examples
+
+* The pagespec "created_before(foo)" has an influence list that contains foo.
+ The removal or (re)creation of foo changes what pages match it. Note that
+ this is true even if the pagespec currently fails to match.
+
+* The pagespec "foo" has an empty influence list. This is because a
+ modification/creation/removal of foo directly changes what the pagespec
+ matches.
+
+* The pagespec "*" has an empty influence list, for the same reason.
+ Avoiding including every page in the wiki into its influence list is
+ very important!
+
+>>> So, why don't the above influence lists contain the currently matched pages?
+>>> Don't you need this to handle the removal problem? -- [[Will]]
+
+>>>> The removal problem is slightly confusingly named, since it does not
+>>>> affect pages that were matched by a glob and have been removed. Such
+>>>> pages can be handled without being influences, because ikiwiki knows
+>>>> they have been removed, and so can still match them against the
+>>>> pagespec, and see they used to match; and thus knows that the
+>>>> dependency has triggered.
+>>>>
+>>>> Maybe the thing to do is consider this an optimisation, where such
+>>>> pages are influences, but ikiwiki is able to implicitly find them,
+>>>> so they do not need to be explicitly stored. --[[Joey]]
+
+* The pagespec "title(foo)" has an influence list that contains every page
+ that currently matches it. A change to any matching page can change its
+ title, making it not match any more, and so the list is needed due to the
+ removal problem. A page that does not have a matching title is not an
+ influence, because modifying the page to change its title directly
+ changes what the pagespec matches.
+
+* The pagespec "backlink(index)" has an influence list
+ that contains index (because a change to index changes the backlinks).
+ Note that this is true even if the backlink currently fails.
+
+* The pagespec "link(done)" has an influence list that
+ contains every page that it matches. A change to any matching page can
+ remove a link and make it not match any more, and so the list is needed
+ due to the removal problem.
+
+>> Why doesn't this include every page? If I change a page that doesn't have a link to
+>> 'done' to include a link to 'done', then it will now match... or is that considered a
+>> 'direct match'? -- [[Will]]
+
+>>> The regular dependency calculation code will check if every changed
+>>> page matches every dependency. So it will notice the link was added.
+>>> --[[Joey]]
+
+#### Low-level Calculation
+
+One way to calculate a pagespec's influence would be to
+expand the SuccessReason and FailReason objects used and returned
+by `pagespec_match`. Make the objects be created with an
+influence list included, and when the objects are ANDed or ORed
+together, combine the influence lists.
+
+That would have the benefit of allowing just using the existing `match_*`
+functions, with minor changes to a few of them to gather influence info.
+
+But does it work? Let's try some examples:
+
+Consider "bugs/* and link(done) and backlink(index)".
+
+Its influence list contains index, and it contains all pages that the whole
+pagespec matches. It should, ideally, not contain all pages that link
+to done. There are a lot of such pages, and only a subset influence this
+pagespec.
+
+When matching this pagespec against a page, the `link` will put the page
+on the list. The `backlink` will put index on the list, and they will be
+anded together and combined. If we combine the influences from each
+successful match, we get the right result.
+
+Now consider "bugs/* and link(done) and !backlink(index)".
+
+It influence list is the same as the previous one, even though a term has
+been negated. Because a change to index still influences it, though in a
+different way.
+
+If negation of a SuccessReason preserves the influence list, the right
+influence list will be calculated.
+
+Consider "bugs/* and (link(done) or backlink(index))"
+and "bugs/* and (backlink(index) or link(done))'
+
+Its clear that the influence lists for these are identical. And they
+contain index, plus all matching pages.
+
+When matching the first against page P, the `link` will put P on the list.
+The OR needs to be a non-short-circuiting type. (In perl, `or`, not `||` --
+so, `pagespec_translate` will need to be changed to not use `||`.)
+Given that, the `backlink` will always be evalulated, and will put index
+onto the influence list. If we combine the influences from each
+successful match, we get the right result.
+
+> This is implemented, seems to work ok. --[[Joey]]
+
+> `or` short-circuits too, but the implementation correctly uses `|`,
+> which I assume is what you meant. --[[smcv]]
+
+>> Er, yeah. --[[Joey]]
+
+----
+
+What about: "!link(done)"
+
+Specifically, I want to make sure it works now that I've changed
+`match_link` to only return a page as an influence if it *does*
+link to done.
+
+So, when matching against page P, that does not link to done,
+there are no influences, and the pagespec matches. If P is later
+changed to add a link to done, then the dependency resolver will directly
+notice that.
+
+When matching against page P, that does link to done, P
+is an influence, and the pagespec does not match. If P is later changed
+to not link to done, the influence will do its job.
+
+Looks good!
+
+----
+
+Here is a case where this approach has some false positives.
+
+"bugs/* and link(patch)"
+
+This finds as influences all pages that link to patch, even
+if they are not under bugs/, and so can never match.
+
+To fix this, the influence calculation would need to consider boolean
+operators. Currently, this turns into roughly:
+
+`FailReason() & SuccessReason(patch)`
+
+Let's say that the glob instead returns a HardFailReason, which when
+ANDed with another object, drops their influences. (But when ORed, combines
+them.) Fixes the above, but does it always work?
+
+"(bugs/* or link(patch)) and backlink(index)" =>
+`( HardFailReason() | SuccessReason(patch) ) & SuccessReason(index)`` =>
+`SuccessReason(patch) & SuccessReason(index)` =>
+SuccessReason(patch, index) => right
+
+"(bugs/* and link(patch)) or backlink(index)" =>
+`( HardFailReason() & SuccessReason(patch) ) | SuccessReason(index)`` =>
+`HardFailReason() | SuccessReason(index)` =>
+`SuccessReason(index)` => right
+
+#### High-level Calculation and Storage
+
+Naively calculating the full influence list for a pagespec requires trying
+to match it against every page in the wiki. I'd like to avoid doing such
+expensive matching redundantly.
+
+It may be possible, for some types of pagespecs, to just try matching a
+single, arbitrary page against it, and know the full influence list has
+been obtained. It seems to be that case that if a pagespec has any
+influences, matching any page will return at least one. So if none are
+returned, we can skip trying other pages.
+
+If the influence list does not include the page that was tried, we know
+that the pagespec does not things like `link()` and `title()`, that are
+influenced by the page's own content. So it *might* be safe to not try
+matching any more pages in this case too. I think it would work for all
+current pagespec terms. There might be a hypothetical term where this
+optimisation doesn't work. We could add a special case to ensure it can
+work: If a term declares it is unfluenced by "", then it means it is
+always influenced by the matching page.
+
+Anyway, this seems worth doing: Add a `pagespec_match_all`, which returns a
+list of all pages in the whole wiki that match the pagespec, and also adds
+the pagespec as a dependency, and while it's at it, calculates and stores
+the influence list.
+
+It could have an optional sort parameter, and limit parameter, to control
+how many items to return and the sort order. So when inline wants to
+display the 10 newest, only the influence lists for those ten are added.
+
+If `pagespec_match_depends` can be used by all plugins, then great,
+influences are automatically calculated, no extra work needs to be done.
+
+If not, and some plugins still need to use `pagespec_match_list` or
+`pagespec_match`, and `add_depends`, then I guess that `add_depends` can do
+a slightly more expensive influence calculation.
+
+Bonus: If `add_depends` is doing an influence calculation, then I can remove
+the nasty hack it currently uses to decide if a given pagespec is safe to use
+with an existence or links dependency.
+
+Where to store the influence list? Well, it appears that we can just add
+(content) dependencies for each item on the list, to the page's
+regular list of simple dependencies. So, the data stored ends up looking
+just like what is stored today by the explicit dependency hacks. Except,
+it's calculated more smartly, and is added automatically.
+
+> I've implemented influence calculation in `add_depends`. As expected,
+> it means rather a lot more work, and makes some things much slower.
+> Optimisations next.. --[[Joey]]
+
+#### Influence types
+
+Note that influences can also have types, same as dependency types.
+For example, "backlink(foo)" has an influence of foo, of type links.
+"created_before(foo)" also is influenced by foo, but it's a presence
+type. Etc.
+
+> This is an interesting concept that I hadn't considered. It might
+> allow significant computational savings, but I suspect will be tricky
+> to implement. -- [[Will]]