Note that for more formal bug reports or todo items, you can also edit the
[[bugs]] and [[todo]] pages.
-# Installation/Setup questions
-
-I have just installed ikiwiki and it works - at least I have the example index.mdwn page
-compiled and visible. However I have a few issues/problems:-
-
-* A couple of the 'optional' Perl modules aren't optional, you can't install ikiwiki without them,
-these are HTML::Template and HTML::Scrubber (at least I think it was these two, it's a bit messy
-to go back and find out).
-
-> You're right, HTML::Template is required. HTML::Scrubber is only required
-> in the default configuration, and is optional if the htmlscrubber plugin
-> is disabled. --[[Joey]]
-
-* I don't seem to have got an ikiwiki man page created.
-
-> It should be installed in /usr/share/man, or a similar directory
-> depending on how your perl is set up and how you did the install.
-> --[[Joey]]
-
-> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki
-> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere
-> more sensible. [[Chris]]
-
-* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to
-my local settings. There are no errors but neither does anything get compiled. An ikiwiki
-command to explicitly do the compile works fine. Am I misunderstanding something here?
-
-> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild.
-> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything
-either though it was the command line I originally used to compile. After a long interval I 'touch'ed
-the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused!
-
-> ikiwiki only compiles files whose modification times have changed. It
-> should see any change made as close as a second after the last compile.
-> When run with --setup, ikiwiki always rebuilds every file in the wiki. If
-> --setup is not working, you must have it pointed at the wrong path or
-> something; you can pass -v to see what it's doing. I don't know why it
-> would not see recently changed files; you could try stracing it.
-> --[[Joey]]
+[[toc ]]
-> OK, thanks, I don't quite know what was happening before but it seems to be working right now.
-> --[[Chris]]
-
->> Weird. I wish I knew what happened, but as it's working now, I'm
->> guessing some kind of user error was involved. --[[Joey]]
+# Installation/Setup questions
-* I wish there was a mailing list, much easier for this sort of stuff than this, apart from
-anything else I get to use a decent editor.
+(I've moved HarleyPig's problem to its [[own_page|bugs/xgettext_issue]]
+--[[Joey]])
----
# Excellent - how do I translate a TWiki site?
----
-# OpenID
-
-I just figured I'd edit something on the page with my OpenID, since you've implemented it! --*[Kyle](http://kitenet.net/~kyle/)*=
-
-> Kyle, If you like openid, I can switch your personal wiki over to use your openid. --[[Joey]]
-
-----
-
-# ACL
-
-> Moved to [[todo/ACL]] --[[Joey]]
-
-----
-
-Some questions about the RecentChanges function. -- Ethan
-
-> (Moved to [[todo/recentchanges]] --[[Joey]])
-
-----
-
-Also, I'd like to request another template parameter which is just
-$config{url}. That way you won't have to hard-code the URL of the wiki into
-the template. -- Ethan
-
-> That's already available in the BASEURL parameter. --[[Joey]]
-
-----
-
-# Canonical feed location?
-
-Moved to [[todo/canonical_feed_location]] --[[Joey]]
-
-----
-
# asciidoc or txt2tags ?
Any plugins or support for using asciidoc or txt2tags as the wiki language and/or exporting to asciidoc or txt2tags?
>>
>> --JeremyReed
+>>> Have a look at [pandoc](http://code.google.com/p/pandoc/). It can make PDFs via pdflatex. --[[roktas]]
+
----
# Using with CVS?
-Any examples of using ikiwiki with cvs?
-
-> No, although the existing svn backend could fairly esily be modified into
-> a CVS backend, by someone who doesn't mind working with CVS. --[[Joey]]
+Moved to a [[todo_item|todo/CVS_backend]]. --[[JoshTriplett]]
----
# Show differences before saving page?
-It would be nice to be able to have a button to show "Differences" (or "Show Diff") when
-editing a page. Is that an option that can be enabled?
-
-> It's doable, it could even be done by a [[todo/plugin]], I think.
-> --[[Joey]]
+Moved to the existing [[todo_item|todo/preview_changes]]. --[[JoshTriplett]]
----
----
-# Disable sub-discussion pages?
+# Access Keys
+
+Would anyone else find this a valuable addition. In oddmuse and instiki (the only other
+wiki engines I am currently using, the edit, home, and submit link tags have an
+accesskey attribute. I find it nice not to have to resort to the mouse for those
+actions. However, it may not be something everyone appreciates. Any thoughts?
+--[Mazirian](http://mazirian.com)
+
+> Maybe, although it would need to take the critisism at
+> <http://www.cs.tut.fi/~jkorpela/forms/accesskey.html> into account.
-Moved to [[bugs]] -- [[Joey]]
+>> Thank you for that link. Given that the edit link is the first thing you tab to
+>> in the current layout, I guess it isn't all that necessary. I have had a
+>> a user complaint recently that Alt-e in oddmuse was overriding his access
+>> to the browser menu.
----
-# wiki\_file\_regexp and RCS ,v files
+# Editing the style sheet.
-I have RCS ,v files in my source directory. But get many "skipping bad filename" warnings.
+It would be nice to be able to edit the stylesheet by means of the cgi. Or is this possible? I wasn't able to achieve it.
+Ok, that's my last 2 cents for a while. --[Mazirian](http://mazirian.com)
-Also I don't see wiki\_file\_regexp documented. Because it is used with $config{wiki\_file\_regexp} I assume it can be set in the ikiwiki.setup.
-I added a comma to it in my IkiWiki.pm in the defaultconfig(). But that was wrong (so I reverted back), because then the ,v files were copied to my www tree.
+> I don't support editing it, but if/when ikiwiki gets file upload support,
+> it'll be possible to upload a style sheet. (If .css is in the allowed
+> extensions list.. no idea how safe that would be, a style sheet is
+> probably a great place to put XSS attacks and evil javascript that would
+> be filtered out of any regular page in ikiwiki). --[[Joey]]
-What is the correct way to include ,v RCS revision files in my source tree without receiving the "bad" messages and without copying over to www tree?
+>> I hadn't thought of that at all. It's a common feature and one I've
+>> relied on safely, because the wikis I am maintaining at the moment
+>> are all private and restricted to trusted users. Given that the whole
+>> point of ikiwiki is to be able to access and edit via the shell as
+>> well as the web, I suppose the features doesn't add a lot. By the
+>> way, the w3m mode is brilliant. I haven't tried it yet, but the idea
+>> is great.
--- [[JeremyReed]]
+----
+
+# Should not create an existing page
-> Add the ,v to the $config{wiki\_file\_prune\_regexps} array. This is how we
-> skip equivilant files from other revision control systems too.
-> --[[Joey]]]
+This might be a bug, but will discuss it here first.
+Clicking on an old "?" or going to a create link but new Markdown content exists, should not go into "create" mode, but should do a regular "edit".
->> Okay, I used in my setup configuration:
->> exclude => qr/\,v$/,
->> I looked in source for the array you mentioned above and noticed the $setup{exclude}. And now I see that is documented.
->> (By the way, the example there doesn't seem correct with a literal asterisk and period wildcard.
->> Maybe it should be qr/\.wav$/,)
->> --[[JeremyReed]]
+> I belive that currently it does a redirect to the new static web page.
+> At least that's the intent of the code. --[[Joey]]
+
+>> Try at your site: `?page=discussion&from=index&do=create`
+>> It brings up an empty textarea to start a new webpage -- even though it already exists here. --reed
+
+>>> Ah, right. Notice that the resulting form allows saving the page as
+>>> discussion, or users/discussion, but not index/discussion, since this
+>>> page already exists. If all the pages existed, it would do the redirect
+>>> thing. --[[Joey]]
----
-# Textile Plugin
+# User database tools?
-It was trivial, but I put together a plugin that uses the Textile markup
-language, which I find to be the most superior of the various options for
-that sort of thing. Where or how do I submit it for inclusion?
+Any tool to view user database?
-> You can post it to [[plugins/contrib]]. --[[Joey]]
+Any tool to edit the user database?
->> Thanks. I tried using the "Add new post" form there, but apparently made a [mess of things somehow](http://ikiwiki.kitenet.net/contrib/textile___40__third-party_plugin__41__.html). Sorry about that.
+> No, but it's fairly easy to write such tools in perl. For example, to
+> list all users in the user database:
->>> No problem, the contrib form had the wrong rootpage setting. I've fixed
->>> it up and moved it to the right place. A copyright statement would be
->>> nice.
+ joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $_ foreach keys %$userinfo'
+ http://joey.kitenet.net/
+ foo
-> How does one go about making a markup language added by means of a plugin, the default markup language. In other words, I would like the index page to be written in Textile.
-> If I include a index.txtl (where txtl is the extension I have assigned to be handled by the textile plugin), ikiwiki will ignore it and make a new index.mdwn.
+> To list each user's email address:
->> Sounds like a bug; it should be configurable via `default_pageext`, but
->> I suspect that currently if there are two competing files with different
->> extensions that make the same page, they fight it out and some random
->> one "wins"
->>
->> Until I fix that, you can avoid the one from the underlay directory by
->> setting `underlaydir` to point to an empty directory. --[[Joey]]
->>
->> Ok, fixed (in svn), it will now prefer files in the srcdir over files
->> in the underlaydir that build the same page, no matter what extension.
+ joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $userinfo->{$_}->{email} foreach keys %$userinfo'
+
+ joey@kitenet.net
+
+> Editing is simply a matter of changing values and calling Storable::store().
+> I've not written actual utilities to do this yet because I've only needed
+> to do it rarely, and the data I've wanted has been different each time.
+> --[[Joey]]