>
> --[[Joey]]
-[[!template id=gitbranch branch=smcv/ready/optimize-depends author="[[smcv]]"]]
-
>> I've been looking at optimizing ikiwiki for a site using
>> [[plugins/contrib/album]] (which produces a lot of pages) and it seems
>> that checking which pages depend on which pages does take a significant
>> rather than a single pagespec. This does turn out to be faster, although
>> not as much as I'd like. --[[smcv]]
+>>> [[Merged|done]] --[[smcv]]
+
>>> I just wanted to note that there is a whole long discussion of dependencies and pagespecs on the [[todo/tracking_bugs_with_dependencies]] page. -- [[Will]]
>>>> Yeah, I had a look at that (as the only other mention of `pagespec_merge`).
>>>> I haven't actually deleted it), because the "or" operation is now done in
>>>> the Perl code, rather than by merging pagespecs and translating. --[[smcv]]
-[[!template id=gitbranch branch=smcv/ready/remove-pagespec-merge author="[[smcv]]"]]
-
>>>>> I've now added a patch to the end of that branch that deletes
>>>>> `pagespec_merge` almost entirely (we do need to keep a copy around, in
>>>>> ikiwiki-transition, but that copy doesn't have to be optimal or support
>> It is acceptable not to support downgrades.
>> I don't think we need a NEWS file update since any sort of refresh,
>> not just a full rebuild, will cause the indexdb to be loaded and saved,
->> enabling the optimisation. --[[Joey]]
+>> enabling the optimisation. --[[Joey]]
+
+>>> A refresh will load the current dependencies from `{depends}` and save
+>>> them as-is as a one-element `{dependslist}`; only a rebuild will replace
+>>> the single complex pagespec with a long list of simpler pagespecs.
+>>> --[[smcv]]
Is an array the right data structure? `add_depends` has to loop through the
array to avoid dups, it would be better if a hash were used there. Since
>> a bit faster. --[[smcv]]
>>> It depends, really. And it'd certianly make sense to benchmark such a
->>> change. --[[Joey]]
+>>> change. --[[Joey]]
+
+>>>> Benchmarked, below. --[[smcv]]
Also, since a lot of places are calling add_depends in a loop, it probably
makes sense to just make it accept a list of dependencies to add. It'll be
>> Well, I was thinking that it might be sufficient to build a `%seen`
>> hash of dependencies inside `add_depends`, if the places that call
>> it lots were changed to just call it once. Of course the only way to
->> tell is benchmarking. --[[Joey]]
+>> tell is benchmarking. --[[Joey]]
+
+>>> It doesn't seem that it significantly affects performance either way.
+>>> --[[smcv]]
In Render.pm, we now have a triply nested loop, which is a bit
scary for efficiency. It seems there should be a way to
>> run more often than before. That function is pretty inexpensive, but..
>> --[[Joey]]
+>>> I don't see anything that can be hoisted without significant refactoring,
+>>> actually. Beware that there are two pagename calls in the loop: one for
+>>> `$f` (which is the page we might want to rebuild), and one for `$file`
+>>> (which is the changed page that it might depend on). Note that I didn't
+>>> choose those names!
+>>>
+>>> The three loops are over source files, their lists of dependency pagespecs,
+>>> and files that might have changed. I see the following things we might be
+>>> doing redundantly:
+>>>
+>>> * If `$file` is considered as a potential dependency for more than
+>>> one `$f`, we evaluate `pagename($file)` more than once. Potential fix:
+>>> cache them (this turns out to save about half a second on the docwiki,
+>>> see below).
+>>> * If several pages depend on the same pagespec, we evaluate whether each
+>>> changed page matches that pagespec more than once: however, we do so
+>>> with a different location parameter every time, so repeated calls are,
+>>> in the general case, the only correct thing to do. Potential fix:
+>>> perhaps special-case "page x depends on page y and nothing else"
+>>> (i.e. globs that have no wildcards) into a separate hash? I haven't
+>>> done anything in this direction.
+>>> * Any preparatory work done by pagespec_match (converting the pagespec
+>>> into Perl, mostly?) is done in the inner loop; switching to
+>>> pagespec_match_list (significant refactoring) saves more than half a
+>>> second on the docwiki.
+>>>
+>>> --[[smcv]]
+
Very good catch on img/meta using the wrong dependency; verified in the wild!
(I've cherry-picked those bug fixes.)
+----
+
+Benchmarking results: I benchmarked by altering docwiki.setup to switch off
+verbose, running "make clean && ./Makefile.PL && make", and timing one rebuild
+of the docwiki followed by three refreshes. Before each refresh I used
+`touch plugins/*.mdwn` to have something significant to refresh.
+
+I'm assuming that "user" CPU time is the important thing here (system time was
+relatively small in all cases, up to 0.35 seconds per run).
+
+master at the time of rebasing: 14.20s to rebuild, 10.04/12.07/14.01s to
+refresh. I think you can see the bug clearly here - the pagespecs are getting
+more complicated every time!
+
+> I can totally see a bug here, and it's one I didn't think existed. Ie,
+> I thought that after the first refresh, the pagespec should stabalize,
+> and what it stabalized to was probably unnecessarily long, but not
+> growing w/o bounds!
+>
+> a) Explains why ikiwiki.info has been so slow lately. Well that and some
+> other things that overloaded the system.
+> b) Suggests to me we will probably want to force a rebuild on upgrade
+> when fixing this (via the mechanism in the postinst).
+>
+> I've investigated why the pagespecs keep growing: When page A changes,
+> its old depends are cleared. Then
+> page B that inlines A gets rebuilt, and its old depends are also cleared.
+> But page B also inlines page C; which means C gets re-rendered. And this
+> happens w/o its old depends being cleared, so C's depends are doubled.
+> --[[Joey]]
+
+After the initial optimization: 14.27s to rebuild, 8.26/8.33/8.26 to refresh.
+Success!
+
+Not pre-joining dependencies actually took about ~0.2s more; I don't know why.
+I'm worried that duplicates will just build up (again) in less simple cases,
+though, so 0.2s is probably a small price to pay for that not happening (it
+might well be experimental error, for that matter).
+
+> It's weird that the suggested optimisations to
+> `add_depends` had no effect. So, the commit message to
+> b6fcb1cb0ef27e5a63184440675d465fad652acf is actually wrong.. ? --[[Joey]]
+
+>> I'll try benchmarking again on the non-public wiki where I had the 4%
+>> speedup. The docwiki is so small that 4% is hard to measure... --[[smcv]]
+
+Not saving {depends} to the index, using a hash instead of a list to
+de-duplicate, and allowing add_depends to take an arrayref instead of a single
+pagespec had no noticable positive or negative effect on this test.
+
+> I see e4cd168ebedd95585290c97ff42234344bfed46c is still in your branch
+> though. I don't like using an arrayref, it could just take `($page, @depends)`.
+> and I don't see the need to keep it if it doesn't currently help.
+
+>> I'll drop it. --[[smcv]]
+
+> Is there any reason to keep 7227c2debfeef94b35f7d81f42900aa01820caa3
+> if it doesn't improve speed?
+> --[[Joey]]
+
+>> I'll try benchmarking on a more complex wiki and see whether it has a
+>> positive or negative effect. It does avoid being O(n**2) in number of
+>> dependencies. --[[smcv]]
+
+Memoizing the results of pagename brought the rebuild time down to 14.06s
+and the refresh time down to 7.96/7.92/7.92, a significant win.
+
+> Ok, that seems safe to memoize. (It's a real function and it isn't
+> called with a great many inputs.) Why did you chose to memoize it
+> explicitly rather than adding it to the memoize list at the top?
+
+>> It does depend on global variables, so using Memoize seemed like asking for
+>> trouble. I suppose what I did is equivalent to Memoize though... --[[smcv]]
+
+Refactoring to use pagespec_match_list looks more risky from a code churn
+point of view; rebuild now takes 14.35s, but refresh is only 7.30/7.29/7.28,
+another significant win.
+
+--[[smcv]]
+
+> I had mostly convinced myself that
+> `pagespec_match_list` would not lead to a speed gain here. My reasoning
+> was that you want to stop after finding one match, while `pagespec_match_list`
+> checks all pages for matches. So what we're seeing is that
+> on a rebuild, `@changed` is all pages, and not short-circuiting leads
+> to unnecessary work. OTOH, on refresh, `@changed` is small and I suppose
+> `pagespec_match_list`'s other slight efficiencies win out somehow.
+>
+> Welcome to the "I made ikiwiki twice as fast
+> and all I got was this lousy git sha1sum" club BTW :-) --[[Joey]]
+
[[!tag wishlist patch patch/core]]