it's not really hard. This page is a complete reference to everything a
plugin might want to do. There is also a quick [[tutorial]].
-[[toc levels=2]]
+[[!toc levels=2]]
## Types of plugins
hook(type => "preprocess", id => "foo", call => \&preprocess);
-Replace "foo" with the command name that will be used inside brackets for
-the preprocessor directive.
-
-Each time the directive is processed, the referenced function (`preprocess`
-in the example above) is called, and is passed named parameters. A "page"
-parameter gives the name of the page that embedded the preprocessor
-directive, while a "destpage" parameter gives the name of the page the
-content is going to (different for inlined pages), and a "preview"
-parameter is set to a true value if the page is being previewed. All
-parameters included in the directive are included as named parameters as
-well. Whatever the function returns goes onto the page in place of the
+Replace "foo" with the command name that will be used for the preprocessor
directive.
-An optional "scan" parameter, if set to a true value, makes the hook be
-called during the preliminary scan that ikiwiki makes of updated pages,
-before begining to render pages. This parameter should be set to true if
-the hook modifies data in `%links`. Note that doing so will make the hook
-be run twice per page build, so avoid doing it for expensive hooks. (As an
-optimisation, if your preprocessor hook is called in a void contets, you
-can assume it's being run in scan mode.)
+Each time the directive is processed, the referenced function (`preprocess`
+in the example above) is called. Whatever the function returns goes onto
+the page in place of the directive. Or, if the function aborts using
+`error()`, the directive will be replaced with the error message.
+
+The function is passed named parameters. First come the parameters set
+in the preprocessor directive. These are passed in the same order as
+they're in the directive, and if the preprocessor directive contains a bare
+parameter (example: `\[[!foo param]]`), that parameter will be passed with
+an empty value.
+
+After the parameters from the preprocessor directive some additional ones
+are passed: A "page" parameter gives the name of the page that embedded the
+preprocessor directive, while a "destpage" parameter gives the name of the
+page the content is going to (different for inlined pages), and a "preview"
+parameter is set to a true value if the page is being previewed.
+
+If `hook` is passed an optional "scan" parameter, set to a true value, this
+makes the hook be called during the preliminary scan that ikiwiki makes of
+updated pages, before begining to render pages. This should be done if the
+hook modifies data in `%links`. Note that doing so will make the hook be
+run twice per page build, so avoid doing it for expensive hooks. (As an
+optimisation, if your preprocessor hook is called in a void context, you
+can assume it's being run in scan mode, and avoid doing expensive things at
+that point.)
Note that if the [[htmlscrubber]] is enabled, html in
[[ikiwiki/PreProcessorDirective]] output is sanitised, which may limit what
a cgi. This hook allows modifying the variables available on those
templates. The function is passed named parameters. The "page" and
"destpage" parameters are the same as for a preprocess hook. The "template"
-parameter is a [[cpan HTML::Template]] object that is the template that
+parameter is a [[!cpan HTML::Template]] object that is the template that
will be used to generate the page. The function can manipulate that
template object.
The function is passed named parameters: "page", "destpage", and "content",
and should return the sanitized content.
+### postscan
+
+ hook(type => "postscan", id => "foo", call => \&postscan);
+
+This hook is called once the full page body is available (but before the
+format hook). The most common use is to update search indexes. Added in
+ikiwiki 2.54.
+
+The function is passed named parameters "page" and "content". Its return
+value is ignored.
+
### format
hook(type => "format", id => "foo", call => \&format);
hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
hook(type => "formbuilder", id => "foo", call => \&formbuilder);
-These hooks allow tapping into the parts of ikiwiki that use [[cpan
+These hooks allow tapping into the parts of ikiwiki that use [[!cpan
CGI::FormBuilder]] to generate web forms. These hooks are passed named
parameters: `cgi`, `session`, `form`, and `buttons`. These are, respectively,
the `CGI` object, the user's `CGI::Session`, a `CGI::FormBuilder`, and a
the state is saved. The function can save other state, modify values before
they're saved, etc.
+## renamepage
+
+ hook(type => "renamepage", id => "foo", call => \&renamepage);
+
+This hook is called by the [[plugins/rename]] plugin when it renames
+something. The hook is passed named parameters: `page`, `oldpage`,
+`newpage`, and `content`, and should try to modify the content to reflect
+the name change. For example, by converting links to point to the new page.
+
+### getsetup
+
+ hook(type => "getsetup", id => "foo", call => \&getsetup);
+
+This hooks is not called during normal operation, but only when setting up
+the wiki, or generating a setup file. Plugins can use this hook to add
+configuration options.
+
+The hook is passed no parameters. It returns data about the configuration
+options added by the plugin. It can also check if the plugin is usable, and
+die if not, which will cause the plugin to not be offered in the configuration
+interface.
+
+The data returned is a list of `%config` options, followed by a hash
+describing the option. For example:
+
+ return
+ option_foo => {
+ type => "boolean",
+ description => "enable foo",
+ safe => 1,
+ rebuild => 1,
+ },
+ option_bar => {
+ type => "string",
+ example => "hello",
+ description => "what to say",
+ safe => 1,
+ rebuild => 0,
+ },
+
+* `type` can be "boolean", "string", "integer", "pagespec",
+ or "internal" (used for values that are not user-visible). The type is
+ the type of the leaf values; the `%config` option may be an array or
+ hash of these.
+* `example` can be set to an example value.
+* `description` is a short description of the option.
+* `description_html` is an optional short description, that can contain html
+* `safe` should be false if the option should not be displayed in unsafe
+ configuration methods, such as the web interface. Anything that specifies
+ a command to run, a path on disk, or a regexp should be marked as unsafe.
+* `rebuild` should be true if changing the option will require a wiki rebuild.
+
## Plugin interface
To import the ikiwiki plugin interface:
A plugin can access the wiki's configuration via the `%config`
hash. The best way to understand the contents of the hash is to look at
-[[ikiwiki.setup]], which sets the hash content to configure the wiki.
+your ikiwiki setup file, which sets the hash content to configure the wiki.
### %pagestate
#### `template($;@)`
-Creates and returns a [[cpan HTML::Template]] object. The first parameter
+Creates and returns a [[!cpan HTML::Template]] object. The first parameter
is the name of the file in the template directory. The optional remaining
parameters are passed to `HTML::Template->new`.
This is the standard gettext function, although slightly optimised.
-#### `urlto($$)`
+#### `urlto($$;$)`
Construct a relative url to the first parameter from the page named by the
second. The first parameter can be either a page name, or some other
destination file, as registered by `will_render`.
+If the third parameter is passed and is true, an absolute url will be
+constructed instead of the default relative url.
+
#### `targetpage($$)`
Passed a page and an extension, returns the filename that page will be
### RCS plugins
-ikiwiki's support for [[revision_control_systems|rcs]] also uses pluggable
-perl modules. These are in the `IkiWiki::RCS` namespace, for example
-`IkiWiki::RCS::svn`.
+ikiwiki's support for [[revision_control_systems|rcs]] is also done via
+plugins. See [[RCS_details|rcs/details]] for some more info.
+
+RCS plugins must register a number of hooks. Each hook has type 'rcs',
+and the 'id' field is set to the name of the hook. For example:
+
+ hook(type => "rcs", id => "rcs_update", call => \&rcs_update);
+ hook(type => "rcs", id => "rcs_prepedit", call => \&rcs_prepedit);
+
+#### `rcs_update()`
+
+Updates the working directory with any remote changes.
+
+#### `rcs_prepedit($)`
+
+Is passed a file to prepare to edit. It can generate and return an arbitrary
+token, that will be passed into `rcs_commit` when committing. For example,
+it might return the current revision ID of the file, and use that
+information later when merging changes.
+
+#### `rcs_commit($$$;$$)`
+
+Passed a file, message, token (from `rcs_prepedit`), user, and ip address.
+Should try to commit the file. Returns `undef` on *success* and a version
+of the page with the rcs's conflict markers on failure.
+
+#### `rcs_commit_staged($$$)`
+
+Passed a message, user, and ip address. Should commit all staged changes.
+Returns undef on success, and an error message on failure.
+
+Changes can be staged by calls to `rcs_add, `rcs_remove`, and
+`rcs_rename`.
+
+#### `rcs_add($)`
+
+Adds the passed file to the archive. The filename is relative to the root
+of the srcdir.
+
+Note that this should not check the new file in, it should only
+prepare for it to be checked in when rcs_commit (or `rcs_commit_staged`) is
+called. Note that the file may be in a new subdir that is not yet in
+to version control; the subdir can be added if so.
+
+#### `rcs_remove($)`
+
+Remove a file. The filename is relative to the root of the srcdir.
+
+Note that this should not check the removal in, it should only prepare for it
+to be checked in when `rcs_commit` (or `rcs_commit_staged`) is called. Note
+that the new file may be in a new subdir that is not yet inversion
+control; the subdir can be added if so.
+
+#### `rcs_rename($$)`
+
+Rename a file. The filenames are relative to the root of the srcdir.
+
+Note that this should not commit the rename, it should only
+prepare it for when `rcs_commit` (or `rcs_commit_staged`) is called.
+The new filename may be in a new subdir, that is not yet added to
+version control. If so, the subdir will exist already, and should
+be added to revision control.
+
+#### `rcs_recentchanges($)`
+
+Examine the RCS history and generate a list of recent changes.
+The parameter is how many changes to return.
+
+The data structure returned for each change is:
+
+ {
+ rev => # the RCSs id for this commit
+ user => # name of user who made the change,
+ committype => # either "web" or the name of the rcs,
+ when => # time when the change was made,
+ message => [
+ { line => "commit message line 1" },
+ { line => "commit message line 2" },
+ # etc,
+ ],
+ pages => [
+ {
+ page => # name of page changed,
+ diffurl => # optional url to a diff of changes
+ },
+ # repeat for each page changed in this commit,
+ ],
+ }
+
+#### `rcs_diff($)`
+
+The parameter is the rev from `rcs_recentchanges`.
+Should return a list of lines of the diff (including \n) in list
+context, and the whole diff in scalar context.
+
+#### `rcs_getctime($)`
-Each RCS plugin must support all the `IkiWiki::rcs_*` functions.
-See IkiWiki::RCS::Stub for the full list of functions. It's ok if
-`rcs_getctime` does nothing except for throwing an error.
+This is used to get the page creation time for a file from the RCS, by looking
+it up in the history.
-See [[RCS_details|rcs/details]] for some more info.
+It's ok if this is not implemented, and throws an error.
### PageSpec plugins
### Setup plugins
-The ikiwiki setup file is loaded using a pluggable mechanism. If you
-look at the top of [[ikiwiki.setup]], it starts with
-'use IkiWiki::Setup::Standard', and the rest of the file is passed to
-that module's import method.
+The ikiwiki setup file is loaded using a pluggable mechanism. If you look
+at the top of a setup file, it starts with 'use IkiWiki::Setup::Standard',
+and the rest of the file is passed to that module's import method.
It's possible to write other modules in the `IkiWiki::Setup::` namespace that
can be used to configure ikiwiki in different ways. These modules should,
when imported, populate `$IkiWiki::Setup::raw_setup` with a reference
-to a hash containing all the config items.
+to a hash containing all the config items. They should also implement a
+`gendump` function.
By the way, to parse a ikiwiki setup file, a program just needs to
-do something like `use IkiWiki::Setup; my %setup=IkiWiki::Setup::load($filename)`
+do something like:
+`use IkiWiki::Setup; my %setup=IkiWiki::Setup::load($filename)`