It depends on the Perl `Locale::Po4a::Po` library (`apt-get install po4a`).
+[[!toc levels=2]]
+
Introduction
============
language is a "slave" one.
A page written in the "master" language is a "master" page. It can be
-of any page type supported by ikiwiki, but PO. It does not have to be
+of any page type supported by ikiwiki, except `po`. It does not have to be
named a special way: migration to this plugin does not imply any page
renaming work.
`bla/page/index.en.html`, else as `bla/page.en.html`.
Any translation of a "master" page into a "slave" language is called
-a "slave" page; it is written in the gettext PO format. PO is now
+a "slave" page; it is written in the gettext PO format. `po` is now
a page type supported by ikiwiki.
Example: `bla/page.fr.po` is the PO "message catalog" used to
translatable. It is a [[ikiwiki/PageSpec]], so you have lots of
control over what kind of pages are translatable.
-The PO translations files are anyway not considered as being
-translatable, so you don't need to worry about excluding them
-explicitly from this [[ikiwiki/PageSpec]].
+The `.po` files are not considered as being translatable, so you don't need to
+worry about excluding them explicitly from this [[ikiwiki/PageSpec]].
Internal links
--------------
This plugin enhances the regular [[ikiwiki/PageSpec]] syntax with some
additional tests that are documented [[here|ikiwiki/pagespec/po]].
-Automatic PO files update
--------------------------
+Automatic PO file update
+------------------------
Committing changes to a "master" page:
-1. updates the POT file and the PO files for the supported languages
- (this is done in the `needsbuild` hook); the updated PO files are
- then put under version control
-2. triggers a refresh of the corresponding HTML slave pages (this is
- achieved by making any "slave" page dependent on the corresponding
- "master" page, in the `needsbuild` hook)
+1. updates the POT file and the PO files for the "slave" languages;
+ the updated PO files are then put under version control;
+2. triggers a refresh of the corresponding HTML slave pages.
Also, when the plugin has just been enabled, or when a page has just
been declared as being translatable, the needed POT and PO files are
Discussion pages
----------------
-Discussion should happen in the language in which the pages are written for
-real, *i.e.* the "master" one. If discussion pages are enabled, "slave" pages
-therefore link to the "master" page's discussion page.
+Discussion should happen in the language in which the pages are
+written for real, *i.e.* the "master" one. If discussion pages are
+enabled, "slave" pages therefore link to the "master" page's
+discussion page.
Translating
-----------
-One can edit the PO files using ikiwiki's CGI (a message-by-message interface
-could also be implemented at some point).
+One can edit the PO files using ikiwiki's CGI (a message-by-message
+interface could also be implemented at some point).
-If [[tips/untrusted_git_push]] is setup, one can edit the PO files in her
+If [[tips/untrusted_git_push]] is setup, one can edit the PO files in one's
preferred `$EDITOR`, without needing to be online.
TODO
====
-OTHERLANGUAGES dependencies
----------------------------
+Security checks
+---------------
-Pages using `OTHERLANGUAGES` depend on any "master" and "slave" pages
-whose status is being displayed. It is supposed to trigger dependency
-loops, but no practical bugs were noticed yet.
+### Security history
-Should pages using the `OTHERLANGUAGES` template loop be declared as
-linking to the same page in other versions? To be rigorous, they
-should, but this may clutter the backlinks.
+The only past security issues I could find in GNU gettext and po4a
+are:
-Security checks
----------------
+- [CVE-2004-0966](http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2004-0966),
+ *i.e.* [Debian bug #278283](http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278283):
+ the autopoint and gettextize scripts in the GNU gettext package
+ 1.14 and later versions, as used in Trustix Secure Linux 1.5
+ through 2.1 and other operating systems, allows local users to
+ overwrite files via a symlink attack on temporary files.
+- [CVE-2007-4462](http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-4462):
+ `lib/Locale/Po4a/Po.pm` in po4a before 0.32 allows local users to
+ overwrite arbitrary files via a symlink attack on the
+ gettextization.failed.po temporary file.
+
+**FIXME**: check whether this plugin would have been a possible attack
+vector to exploit these vulnerabilities.
+
+Depending on my mood, the lack of found security issues can either
+indicate that there are none, or reveal that no-one ever bothered to
+find (and publish) them.
+
+### PO file features
+
+Can any sort of directives be put in po files that will cause mischief
+(ie, include other files, run commands, crash gettext, whatever)?
+
+> No [documented](http://www.gnu.org/software/gettext/manual/gettext.html#PO-Files)
+> directive is supposed to do so. [[--intrigeri]]
+
+### Running po4a on untrusted content
+
+Are there any security issues on running po4a on untrusted content?
+
+To say the least, this issue is not well covered, at least publicly:
+
+- the documentation does not talk about it;
+- grep'ing the source code for `security` or `trust` gives no answer.
+
+On the other hand, a po4a developer answered my questions in
+a convincing manner, stating that processing untrusted content was not
+an initial goal, and analysing in detail the possible issues.
+
+#### Already checked
+
+- the core (`Po.pm`, `Transtractor.pm`) should be safe
+- po4a source code was fully checked for other potential symlink
+ attacks, after discovery of one such issue
+- the only external program run by the core is `diff`, in `Po.pm` (in
+ parts of its code we don't use)
+- `Locale::gettext`: only used to display translated error messages
+- Nicolas François "hopes" `DynaLoader` is safe, and has "no reason to
+ think that `Encode` is not safe"
+- Nicolas François has "no reason to think that `Encode::Guess` is not
+ safe". The po plugin nevertheless avoids using it by defining the
+ input charset (`file_in_charset`) before asking `Transtractor` to
+ read any file. NB: this hack depends on po4a internals to stay
+ the same.
+
+#### To be checked
+
+##### Locale::Po4a modules
+
+- the modules we want to use have to be checked, as not all are safe
+ (e.g. the LaTeX module's behaviour is changed by commands included
+ in the content); they may use regexps generated from the content; we
+ currently only use the `Text` module
+- the `Text` module does not run any external program
+- check that no module is loaded by `Chooser.pm`, when we tell it to
+ load the `Text` one
+- `nsgmls` is used by `Sgml.pm`
-- `refreshpofiles` uses `system()`, whose args have to be checked more
- thoroughly to prevent any security issue (command injection, etc.).
-- `refreshpofiles` and `refreshpot` create new files; this may need
- some checks, e.g. using `IkiWiki::prep_writefile()`
+##### Text::WrapI18N
+
+`Text::WrapI18N` can cause DoS (see the
+[Debian bug #470250](http://bugs.debian.org/470250)), but it is
+optional and we do not need the features it provides.
+
+It is loaded if available by `Locale::Po4a::Common`; looking at the
+code, I'm not sure we can prevent this at all, but maybe some symbol
+table manipulation tricks could work; overriding
+`Locale::Po4a::Common::wrapi18n` may be easier. I'm no expert at all
+in this field. Joey? [[--intrigeri]]
+
+##### Term::ReadKey
+
+`Term::ReadKey` is not a hard dependency in our case, *i.e.* po4a
+works nicely without it. But the po4a Debian package recommends
+`libterm-readkey-perl`, so it will probably be installed on most
+systems using the po plugin.
+
+If `$ENV{COLUMNS}` is not set, `Locale::Po4a::Common` uses
+`Term::ReadKey::GetTerminalSize()` to get the terminal size. How safe
+is this?
+
+Part of `Term::ReadKey` is written in C. Depending on the runtime
+platform, this function use ioctl, environment, or C library function
+calls, and may end up running the `resize` command (without
+arguments).
+
+IMHO, using Term::ReadKey has too far reaching implications for us to
+be able to guarantee anything wrt. security. Since it is anyway of no
+use in our case, I suggest we define `ENV{COLUMNS}` before loading
+`Locale::Po4a::Common`, just to be on the safe side. Joey?
+[[--intrigeri]]
+
+### msgmerge
+
+`refreshpofiles()` runs this external program. A po4a developer
+answered he does "not expect any security issues from it".
+
+### Fuzzing input
+
+I was not able to find any public information about gettext or po4a
+having been tested with a fuzzing program, such as `zzuf` or `fusil`.
+Moreover, some gettext parsers seem to be quite
+[easy to crash](http://fusil.hachoir.org/trac/browser/trunk/fuzzers/fusil-gettext),
+so it might be useful to bang msgmerge/po4a's heads against such
+a program in order to easily detect some of the most obvious DoS.
+[[--intrigeri]]
+
+> po4a was not fuzzy-tested, but according to one of its developers,
+> "it would be really appreciated". [[--intrigeri]]
gettext/po4a rough corners
--------------------------
live in different directories): say bla.fr.po has been updated in
repo2; pulling repo2 from repo1 seems to trigger a PO update, that
changes bla.fr.po in repo1; then pushing repo1 to repo2 triggers
- a PO update, that changes bla.fr.po in repo2; etc.; fixed in
- `629968fc89bced6727981c0a1138072631751fee`?
-- new translations created in the web interface must get proper charset/encoding
- gettext metadata, else the next automatic PO update removes any non-ascii
- chars; possible solution: put such metadata into the Pot file, and let it
- propagate; should be fixed in `773de05a7a1ee68d2bed173367cf5e716884945a`, time
- will tell.
+ a PO update, that changes bla.fr.po in repo2; etc.; quickly fixed in
+ `629968fc89bced6727981c0a1138072631751fee`, by disabling references
+ in Pot files. Using `Locale::Po4a::write_if_needed` might be
+ a cleaner solution. (warning: this function runs the external
+ `diff` program, have to check security)
+- new translations created in the web interface must get proper
+ charset/encoding gettext metadata, else the next automatic PO update
+ removes any non-ascii chars; possible solution: put such metadata
+ into the Pot file, and let it propagate; should be fixed in
+ `773de05a7a1ee68d2bed173367cf5e716884945a`, time will tell.
Misc. improvements
------------------
-### preview
-
-preview does not work for PO files.
-
-### automatic POT/PO update
-
-Use the `change` hook instead of `needsbuild`?
-
### page titles
-Use nice page titles from meta plugin in links, as inline already does. This is
-actually a duplicate for
-[[bugs/pagetitle_function_does_not_respect_meta_titles]], which might be fixed
-by something like [[todo/using_meta_titles_for_parentlinks]].
-
-### websetup
-
-Which configuration settings are safe enough for websetup?
-
-### parentlinks
-
-When the wiki home page is translatable, the parentlinks plugin sets
-`./index.html` as its translations' single parent link. Ideally, the home page's
-translations should get no parent link at all, just like the version written in
-the master language.
+Use nice page titles from meta plugin in links, as inline already
+does. This is actually a duplicate for
+[[bugs/pagetitle_function_does_not_respect_meta_titles]], which might
+be fixed by something like [[todo/using_meta_titles_for_parentlinks]].
-### backlinks
+### source files format
-If a given translatable `sourcepage.mdwn` links to \[[destpage]],
-`sourcepage.LL.po` also link to \[[destpage]], and the latter has the master
-page *and* all its translations listed in the backlinks.
+Markdown is supported, great, but what about others? The set of file
+formats supported both in ikiwiki and po4a probably is greater than
+`{markdown}`. Warning: the po4a modules are the place where one can
+expect security issues.
Translation quality assurance
-----------------------------