web commit by JeremyReed: add horizontal rule to separate, reply to feedback, remove...

[git.ikiwiki.info.git] / doc / index / discussion.mdwn

diff --git a/doc/index/discussion.mdwn b/doc/index/discussion.mdwn
index 4b8b1448314583da7b536e3fa0b21261c9aceb1b..3fadbcbebf03f2ff03b4f30872b102974c267e76 100644 (file)
--- a/doc/index/discussion.mdwn
+++ b/doc/index/discussion.mdwn
@@ -25,9 +25,11 @@ of via syslog?
 > > The reason is that I'm not logged in on the web server regularly to
 > > check the log files. I'll see whether I can install a logwatch instance.
 
 > > The reason is that I'm not logged in on the web server regularly to
 > > check the log files. I'll see whether I can install a logwatch instance.
 

+----
+

 # Upgrade steps
 
 # Upgrade steps
 

-I upgrades from 1.37 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration.
+I upgrades from 1.40  to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration.

 I had many errors like:
 
     /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink
 I had many errors like:
 
     /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink


@@ -41,27 +43,96 @@ and:
 Probably about six errors like this. I worked around this by removing the files and directories it complained about.
 Finally it finished.
 
 Probably about six errors like this. I worked around this by removing the files and directories it complained about.
 Finally it finished.
 

+> As of version 2.0, ikiwiki enables usedirs by default. See
+> [[tips/switching_to_usedirs]] for details. --[[Joey]]
+
+>> I read the config wrong. I was thinking that it showed the defaults even though commented out
+>> (like ssh configs do). I fixed that part. --JeremyReed
+

 My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt
 me for a password but now just goes right into the "editing" mode.
 The release notes for 2.0 say password auth is still on by default.
 
 My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt
 me for a password but now just goes right into the "editing" mode.
 The release notes for 2.0 say password auth is still on by default.
 

+> It sounds like you have the anonok plugin enabled?
+
+>> Where is the default documented? My config doesn't have it uncommented.
+

 The third problem is that when editing my textbox is empty -- no content.
 
 This is using my custom rcs.pm which has been used thousands of times.
 
 The third problem is that when editing my textbox is empty -- no content.
 
 This is using my custom rcs.pm which has been used thousands of times.
 

+> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I
+> fixed a bug that could result in the edit box always being empty back in
+> version 2.3. The only other way it could happen is if ikiwiki does not
+> have saved state about the page that it's editing (in .ikiwiki/index).
+

 Now I regenerated my ikiwiki.cgi again (no change to my configuration,
 and I just get an empty HTML page when attempting editing or "create".
 
 Now I regenerated my ikiwiki.cgi again (no change to my configuration,
 and I just get an empty HTML page when attempting editing or "create".
 

+> If the page is completly empty then ikiwiki is crashing before it can
+> output anything, though this seems unlikely. Check the webserver logs.
+

 Now I see it created directories for my data. I fixed that by setting 
 usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup
 but I still have empty pages for editing (no textbox no html at all).
 
 Now I see it created directories for my data. I fixed that by setting 
 usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup
 but I still have empty pages for editing (no textbox no html at all).
 

+> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]]
+
+>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-"
+>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes).
+

 (I am posting this now, but will do some research and post some more.)
 
 Is there any webpage with upgrade steps?
 
 (I am posting this now, but will do some research and post some more.)
 
 Is there any webpage with upgrade steps?
 

+> Users are expected to read [[news]], which points out any incompatible
+> changes or cases where manual action is needed.
+
+--JeremyReed
+
+My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me.
+
+Also I forgot to mention that do=recentchanges works good for me. It uses my 
+rcs_recentchanges in my rcs perl module.
+
+The do=prefs does nothing though -- just a blank webpage.
+
+> You need to figure out why ikiwiki is crashing. The webserver logs should
+> tell you.
+
+I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI.
+I was hoping for some output.
+
+I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes
+on changes to revision control modules. Has something changed? I will also look.
+
+> No, the rcs interface has not needed to change in a long time. Also,
+> nothing is done with the rcs for do=prefs.
+

 --JeremyReed
 
 --JeremyReed
 

+Another Followup: I created a new ikiwiki configuration and did the --setup to 
+create an entirely different website. I have same problem there. No prompt for password
+and empty webpage when using the cgi.
+I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know.
+
+The only errors I see when building and installing ikiwiki are:
+
+    Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66.
+
+    gettext 0.14 too old, not updating the pot file
+
+I don't use GNU gettext on here.
+
+I may need to revert back to my old ikiwiki install which has been used to thousands of times (with around
+1000 rcs commits via ikiwiki).
+
+--JeremyReed
+
+I downgraded to version 1.40 (that was what I had before I wrote wrong above).
+Now ikiwiki is working for me again (but using 1.40). I shouldn't have tested on production system :)
+
+--JeremyReed

 
 ----
 # Excellent - how do I translate a TWiki site?
 
 ----
 # Excellent - how do I translate a TWiki site?