`IkiWiki::Plugin::skeleton` that can be fleshed out to make a useful
plugin. `IkiWiki::Plugin::pagecount` is another simple example.
-## Note
+[[toc levels=2]]
+
+## Considerations
One thing to keep in mind when writing a plugin is that ikiwiki is a wiki
*compiler*. So plugins influence pages when they are built, not when they
a "call" parameter, which is a reference to a function to call for the
hook.
-## Writing a [[PreProcessorDirective]]
-
-This is probably the most common use of a plugin.
+## Types of hooks
- IkiWiki::hook(type => "preprocess", id => "foo", call => \&preprocess);
+In roughly the order they are called.
-Replace "foo" with the command name that will be used inside brackers for
-the preprocessor directive.
+### getopt
-Each time the directive is processed, the referenced function (`preprocess` in the example above) is called, and is passed named parameters. A
-"page" parameter gives the name of the page that embedded the preprocessor directive. All parameters included in the directive are included
-as named parameters as well. Whatever the function returns goes onto the
-page in place of the directive.
-
-### Error handing
-
-While a plugin can call ikiwiki's error routine for a fatal error, for
-errors that aren't intended to halt the entire wiki build, including bad
-parameters passed to a [[PreProcessorDirective]], etc, it's better to just
-return the error message as the output of the plugin.
-
-### Html issues
-
-Note that if [[HTMLSanitization]] is enabled, html in
-[[PreProcessorDirective]] output is sanitised, which may limit what your
-plugin can do. Also, the rest of the page content is not in html format at
-preprocessor time. Text output by a preprocessor directive will be passed
-through markdown along with the rest of the page.
+ IkiWiki::hook(type => "getopt", id => "foo", call => \&getopt);
-## Other types of hooks
-
-Beyond PreProcessorDirectives, Other types of hooks that can be used by
-plugins include:
+This allows for plugins to perform their own processing of command-line
+options and so add options to the ikiwiki command line. It's called during
+command line processing, with @ARGV full of any options that ikiwiki was
+not able to process on its own. The function should process any options it
+can, removing them from @ARGV, and probably recording the configuration
+settings in %IkiWiki::config. It should take care not to abort if it sees
+an option it cannot process, and should just skip over those options and
+leave them in @ARGV.
### checkconfig
IkiWiki::hook(type => "checkconfig", id => "foo", call => \&checkconfig);
-This is useful if the plugin needs to check for, or modify ikiwiki's
-configuration. It's called early in the ikiwiki startup process. The
+This is useful if the plugin needs to check for or modify ikiwiki's
+configuration. It's called early in the startup process. The
function is passed no values. It's ok for the function to call
IkiWiki::error if something isn't configured right.
Runs on the raw source of a page, before anything else touches it, and can
make arbitrary changes. The function is passed named parameters `page` and
-`content` should return the filtered content.
+`content` and should return the filtered content.
+
+### preprocess
+
+Adding a [[PreProcessorDirective]] is probably the most common use of a
+plugin.
+
+ IkiWiki::hook(type => "preprocess", id => "foo", call => \&preprocess);
+
+Replace "foo" with the command name that will be used inside brackets for
+the preprocessor directive.
+
+Each time the directive is processed, the referenced function (`preprocess`
+in the example above) is called, and is passed named parameters. A "page"
+parameter gives the name of the page that embedded the preprocessor
+directive, while a "destpage" parameter gices the name of the page the
+content is going to (different for inlined pages). All parameters included
+in the directive are included as named parameters as well. Whatever the
+function returns goes onto the page in place of the directive.
+
+Note that if the [[htmlscrubber]] is enabled, html in
+[[PreProcessorDirective]] output is sanitised, which may limit what your
+plugin can do. Also, the rest of the page content is not in html format at
+preprocessor time. Text output by a preprocessor directive will be
+linkified and passed through markdown (or whatever engine is used to htmlize
+the page) along with the rest of the page.
+
+### htmlize
+
+ IkiWiki::hook(type => "htmlize", id => "ext", call => \&htmlize);
+
+Runs on the raw source of a page and turns it into html. The id parameter
+specifies the filename extension that a file must have to be htmlized using
+this plugin. This is how you can add support for new and exciting markup
+languages to ikiwiki.
+
+The function is passed named parameters: "page" and "content" and should
+return the htmlized content.
+
+### pagetemplate
+
+ IkiWiki::hook(type => "pagetemplate", id => "foo", call => \&pagetemplate);
+
+Each time a page (or part of a blog page, or an rss feed) is rendered, a
+[[template|templates]] is filled out. This hook allows modifying that
+template. The function is passed named parameters. The "page" and
+"destpage" parameters are the same as for a preprocess hook. The "template"
+parameter is a `HTML::Template` object that is the template that will be
+used to generate the page. The function can manipulate that template
+object.
+
+The most common thing to do is probably to call $template->param() to add
+a new custom parameter to the template.
+
+### sanitize
+
+ IkiWiki::hook(type => "sanitize", id => "foo", call => \&sanitize);
+
+Use this to implement html sanitization or anything else that needs to
+modify the body of a page after it has been fully converted to html.
+
+The function is passed named parameters: "page" and "content", and
+should return the sanitized content.
+
+### format
+
+ IkiWiki::hook(type => "format", id => "foo", call => \&format);
+
+The difference between format and sanitize is that sanitize only acts on
+the page body, while format can modify the entire html page including the
+header and footer inserted by ikiwiki, the html document type, etc.
+
+The function is passed named parameters: "page" and "content", and
+should return the formatted content.
### delete
- IkiWiki::hook(type => "delete", id => "foo", call => \&dele);
+ IkiWiki::hook(type => "delete", id => "foo", call => \&delete);
Each time a page or pages is removed from the wiki, the referenced function
is called, and passed the names of the source files that were removed.
parameters, and if it will handle this CGI request, output a page and
terminate the program.
+### savestate
+
+ IkiWiki::hook(type => "savestate", id => "foo", call => \&savestate);
+
+This hook is called wheneven ikiwiki normally saves its state, just before
+the state is saved. The function can save other state, modify values before
+they're saved, etc.
+
+## Error handing
+
+While a plugin can call ikiwiki's `error` routine for a fatal error, for
+errors that aren't intended to halt the entire wiki build, including bad
+parameters passed to a [[PreProcessorDirective]], etc, it's better to just
+return the error message as the output of the plugin.
+
## Wiki configuration
A plugin can access the wiki's configuration via the `%IkiWiki::config`
* `%IkiWiki::renderedfiles` contains the name of the file rendered by a
page
* `%IkiWiki::pagesources` contains the name of the source file for a page.
-* `%IkiWiki::depends` contains a [[GlobList]] that is used to specify other
+* `%IkiWiki::depends` contains a [[PageSpec]] that is used to specify other
pages that a page depends on. If one of its dependencies is updated, the
page will also get rebuilt.
Many plugins will need to add dependencies to this hash; the best way to do
it is by using the IkiWiki::add_depends function, which takes as its
- parameters the page name and a [[GlobList]] of dependencies to add.
+ parameters the page name and a [[PageSpec]] of dependencies to add.
+* `%IkiWiki::forcerebuild` any pages set as the keys to this hash will be
+ treated as if they're modified and rebuilt.
+
+## Generating html links
+
+Many plugins need to generate html links and add them to a page. This is
+done by using the `IkiWiki::htmllink` function. The usual way to call
+htmlllink is:
-## Page templates
+ htmllink($page, $page, $link)
-Plugins are mostly limited to changing the content of pages, to change the
-look and feel of the wiki it's generally better to use a stylesheet and
-[[templates]]. However, there are some hooks in the templates that plugins
-can use to add stuff to the wiki's UI:
+Why is $page repeated? Because if a page is inlined inside another, and a
+link is placed on it, the right way to make that link is actually:
-### Adding content to the page header
+ htmllink($page, $destpage, $link)
-Html that is added to $IkiWiki::config{headercontent} will show up in the
-header of the page. One good thing to put here is a search form.
+Here $destpage is the inlining page. A destpage parameter is passed to some
+of the hook functions above; the ones that are not passed it are not used
+during inlining and don't need to worry about this issue.
## RCS plugins