+Note that for more formal bug reports or todo items, you can also edit the
+[[bugs]] and [[todo]] pages.
+
+[[!toc ]]
+
+# Installation/Setup questions
+
+Ikiwiki creates a .ikiwiki directory in my wikiwc working directory. Should I
+"svn add .ikiwiki" or add it to svn:ignore?
+
+> `.ikiwiki` is used by ikiwiki to store internal state. You can add it to
+> svn:ignore. --[[Joey]]
+> > Thanks a lot.
+
+Is there an easy way to log via e-mail to some webmaster address, instead
+of via syslog?
+
+> Not sure why you'd want to do that, but couldn't you use a tool like
+> logwatch to mail selected lines from the syslog? --[[Joey]]
+
+> > The reason is that I'm not logged in on the web server regularly to
+> > check the log files. I'll see whether I can install a logwatch instance.
+
+I'm trying to install from scratch on a CentOS 4.6 system. I installed perl 5.8.8 from source and then added all the required modules via CPAN. When I build ikiwiki from the tarball, I get this message:
+
+ rendering todo/calendar_--_archive_browsing_via_a_calendar_frontend.mdwn
+ *** glibc detected *** double free or corruption (!prev): 0x0922e478 ***
+ make: *** [extra_build] Aborted
+
+I'm kind of at a loss how to track this down or work around it. Any suggestions? --Monty
+
+> All I can tell you is that it looks like a problem with your C library or
+> perl. Little perl programs like ikiwiki should only be able to trigger
+> such bugs, not contain them. :-) Sorry I can't be of more help.
+> --[[Joey]]
+
+> I had a similar problem after upgrading to the latest version of
+> Text::Markdown from CPAN. You might try either looking for a Markdown
+> package for CentOS or using the latest version of John Gruber's
+> Markdown.pl:
+> <http://daringfireball.net/projects/downloads/Markdown_1.0.2b8.tbz>
+> --[[JasonBlevins]], April 1, 2008 18:22 EDT
+
+>> Unfortunately I couldn't find a CentOS package for markdown, and I
+>> couldn't quite figure out how to use John Gruber's version instead.
+>> I tried copying it to site_perl, etc., but the build doesn't pick
+>> it up. For now I can just play with it on my Ubuntu laptop for which
+>> the debian package installed flawlessly. I'll probably wait for an
+>> updated version of Markdown to see if this is fixed in the future.
+>> --Monty
+
+>I suggest that you pull an older version of Text::Markdown from CPAN. I am using <http://backpan.perl.org/authors/id/B/BO/BOBTFISH/Text-Markdown-1.0.5.tar.gz> and that works just fine.
+>There is a step change in version and size between this version (dated 11Jan2008) and the next version (1.0.12 dated 18Feb2008). I shall have a little look to see why, in due course.
+>Ubuntu Hardy Heron has a debian package now, but that does not work either.
+> --Dirk 22Apr2008
+
+> This might be related to [Text::Markdown bug #37297](http://rt.cpan.org/Public/Bug/Display.html?id=37297).--ChapmanFlack 9Jul2008
+
+----
+
+# Installation of selected docs (html)
+
+The latest release has around 560 files (over 2MB) in html.
+
+Any suggestions or ideas on limiting what html is installed?
+
+For example, I don't see value in every ikiwiki install out there to also install personal "users" ikiwiki pages.
+
+For now I copy ikiwiki.setup. And then use pax with -L switch to copy the targets of the symlinks of the basewiki.
+
+I was thinking of making a list of desired documents from the html directory to install.
+
+--JeremyReed
+
+> You don't need any of them, unless you want to read ikiwiki's docs locally.
+>
+> I don't understand why you're installing the basewiki files manually;
+> ikiwiki has a Makefile that will do this for you. --[[Joey]]
+
+>> The Makefile's install doesn't do what I want so I use different installer for it.
+>> It assumes wrong location for man pages for me. (And it should consider using INSTALLVENDORMAN1DIR and
+>> MAN1EXT but I don't know about section 8 since I don't know of perl value for that.)
+>> I don't want w3m cgi installed; it is optional for my package.
+>> I will just patch for that instead of using my own installer.
+>> Note: I am working on the pkgsrc package build specification for this. This is for creating
+>> packages for NetBSD, DragonFly and other systems that use pkgsrc package system.
+>> --JeremyReed
+
+# Installation as non-root user
+
+I'd like to install ikiwiki as a non-root user. I can plow through getting all the
+perl dependencies installed because that's well documented in the perl world,
+but I don't know how to tell ikiwiki to install somewhere other than / --BrianWilson
+
+> Checkout the tips section for [[tips/SharedHosting]]. It should do the trick. --MattReynolds
+
+----
+
+# Upgrade steps
+
+I upgrades from 1.40 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration.
+I had many errors like:
+
+ /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+and:
+
+ failed renaming /home/bsdwiki/www/wiki/smileys.ikiwiki-new to /home/bsdwiki/www/wiki/smileys: Is a directory
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+Probably about six errors like this. I worked around this by removing the files and directories it complained about.
+Finally it finished.
+
+> As of version 2.0, ikiwiki enables usedirs by default. See
+> [[tips/switching_to_usedirs]] for details. --[[Joey]]
+
+>> I read the config wrong. I was thinking that it showed the defaults even though commented out
+>> (like ssh configs do). I fixed that part. --JeremyReed
+
+My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt
+me for a password but now just goes right into the "editing" mode.
+The release notes for 2.0 say password auth is still on by default.
+
+> It sounds like you have the anonok plugin enabled?
+
+>> Where is the default documented? My config doesn't have it uncommented.
+
+The third problem is that when editing my textbox is empty -- no content.
+
+This is using my custom rcs.pm which has been used thousands of times.
+
+> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I
+> fixed a bug that could result in the edit box always being empty back in
+> version 2.3. The only other way it could happen is if ikiwiki does not
+> have saved state about the page that it's editing (in .ikiwiki/index).
+
+>> Rebuilt it several times. Now that I think of it, I think my early problem of having
+>> no content in the textbox was before I rebuilt the cgi. And after I rebuilt the whole webpage was empty.
+
+Now I regenerated my ikiwiki.cgi again (no change to my configuration,
+and I just get an empty HTML page when attempting editing or "create".
+
+> If the page is completly empty then ikiwiki is crashing before it can
+> output anything, though this seems unlikely. Check the webserver logs.
+
+Now I see it created directories for my data. I fixed that by setting
+usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup
+but I still have empty pages for editing (no textbox no html at all).
+
+> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]]
+
+>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-"
+>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes).
+
+>>> You need to either figure out what your web server does with stderr
+>>> from cgi programs, or run ikiwiki.cgi at the command line with an
+>>> appropriate environment so it thinks it's being called from a web
+>>> server, so you can see how it's failing. --[[Joey]]
+
+(I am posting this now, but will do some research and post some more.)
+
+Is there any webpage with upgrade steps?
+
+> Users are expected to read [[news]], which points out any incompatible
+> changes or cases where manual action is needed.
+
+>> I read it but read the usedirs option wrong :(.
+>> Also it appears to be missing the news from between 1.40 to 2.0 unless they dont' exist.
+>> If they do exist maybe they have release notes I need?
+
+>>> All the old ones are in the NEWS file. --[[Joey]]
+
+--JeremyReed
+
+My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me.
+
+Also I forgot to mention that do=recentchanges works good for me. It uses my
+rcs_recentchanges in my rcs perl module.
+
+The do=prefs does nothing though -- just a blank webpage.
+
+> You need to figure out why ikiwiki is crashing. The webserver logs should
+> tell you.
+
+I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI.
+I was hoping for some output.
+
+I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes
+on changes to revision control modules. Has something changed? I will also look.
+
+> No, the rcs interface has not needed to change in a long time. Also,
+> nothing is done with the rcs for do=prefs.
+
+>> Thanks. I also checked differences between 1.40 Rcs plugins and didn't notice anything significant.
+
+--JeremyReed
+
+Another Followup: I created a new ikiwiki configuration and did the --setup to
+create an entirely different website. I have same problem there. No prompt for password
+and empty webpage when using the cgi.
+I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know.
+
+The only errors I see when building and installing ikiwiki are:
+
+ Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66.
+
+ gettext 0.14 too old, not updating the pot file
+
+I don't use GNU gettext on here.
+
+I may need to revert back to my old ikiwiki install which has been used to thousands of times (with around
+1000 rcs commits via ikiwiki).
+
+--JeremyReed
+
+I downgraded to version 1.40 (that was what I had before I wrote wrong above).
+Now ikiwiki is working for me again (but using 1.40). I shouldn't have tested on production system :)
+
+--JeremyReed
+
+I am back. On a different system, I installed ikiwiki 2.6.1. Same problem -- blank CGI webpage.
+
+So I manually ran with:
+
+ REQUEST_METHOD=GET QUERY_STRING='do=create&page=jcr' kiwiki.cgi
+
+And clearly saw the error:
+
+ [IkiWiki::main] Fatal: Bad template engine CGI::FormBuilder::Template::div: Can't locate CGI/FormBuilder/Template/div.pm
+
+So I found my version was too old and 3.05 is the first to provide "Div" support. I upgraded my p5-CGI-FormBuilder to 3.0501.
+And ikiwiki CGI started working for me.
+
+The Ikiwiki docs about this requirement got removed in Revision 4367. There should be a page that lists the requirements.
+(I guess I could have used the debian/control file.)
+
+> There is a page, [[install]] documents that 3.05 is needed.
+
+>> Sorry, I missed that. With hundreds of wikipages it is hard to read all of them.
+>> I am updating the download page now to link to it.
+
+I am now using ikiwiki 2.6.1 on my testing system.
+
+--JeremyReed