-So you want to set up your own wiki using ikiwiki? This turorial will walk
-you through setting up a wiki that is stored in [[Subversion]] and that has
-optional support for commits from the web.
+This tutorial will walk you through setting up a wiki with ikiwiki.
-1. [[Install]] ikiwiki.
+[[toc ]]
- apt-get install ikiwiki # soon
+## [[Download]] and [[install]] ikiwiki.
- Ikiwiki requires [[MarkDown]] be installed, and also uses the following
- perl modules: `CGI::Session` `CGI::FormBuilder` `HTML::Template`
+If you're using Debian or Ubuntu, ikiwiki is an `apt-get install ikiwiki` away.
+If you're not, see the [[download]] and [[install]] pages.
-2. Create the subversion repository for your wiki.
+## Decide where your wiki's files will go.
- svnadmin create /svn/wikirepo
- svn mkdir file:///svn/wikirepo/trunk -m create
+As a wiki compiler, ikiwiki builds a wiki from files in a source directory,
+and outputs the files to a destination directory. If you keep your wiki in
+a version control system, the source directory will contain a working copy
+checked out from the version control system.
-3. Check out the repository to make the working copy that ikiwiki will use.
+For the purposes of this tutorial, we'll set shell variables
+for these locations, and use those variables in the commands that follow.
- svn co file:///svn/wikirepo/trunk ~/wikiwc
+ SRCDIR=~/wikiwc
+ DESTDIR=~/public_html/wiki/
-4. Create some files and add them into subversion.
+Note that ikiwiki owns the working copy directory; do not perform your own
+edits in ikiwiki's working copy.
- echo "Welcome to my empty wiki." > ~/wikiwc/index.mdwn
- echo "Feel free to edit this page" > ~/wikiwc/sandbox.mdwn
- svn add ~/wikiwc/*.mdwn
- svn commit ~/wikiwc -m add
+## Create the beginnings of your wiki.
-5. Build your wiki for the first time.
+This will create a simple main page for the wiki.
- ikiwiki --verbose ~/wikiwc/ \
- /usr/lib/ikiwiki/templates ~/public_html/wiki/ \
- --url=http://host/~you/wiki/
+ mkdir $SRCDIR
+ cd $SRCDIR
+ $EDITOR index.mdwn
- Replace the url with the right url to your wiki. You should now
- be able to visit the url and see your page that you created earlier.
+In the editor, you could start by entering a simple page like
+[[toggle id=page text="this one"]].
+[[toggleable id=page text="""
+ Welcome to your new wiki.
-6. Repeat steps 4 and 5 as desired, editing or adding pages and rebuilding
- the wiki. You can play around with other ikiwiki parameters such as
- --wikiname too. Get confortable with its command line.
+ All wikis are supposed to have a \[[SandBox]],
+ so this one does too.
-7. By now you should be getting tired of typing in all the command line
- options each time you change something in your wiki's setup. And it's
- also getting old to have to manualy rebuild the wiki each time you
- change a file. Time to introduce setup files.
-
- A sample setup file is [[ikiwiki.setup]]. Download it (or copy it from
- `doc/ikiwiki.setup` in the ikiwiki sources), and edit it.
+ ----
+
+ This wiki is powered by [ikiwiki](http://ikiwiki.info).
+"""]]
- Most of the options, like `wikiname` in the setup file are the same as
- ikiwiki's command line options (documented in [[usage]]. `srcdir`,
- `templatedir` and `destdir` are the three directories you specify when
- running ikiwiki by hand. `svnrepo` is the path to your subversion
- repository. Make sure that all of these are pointing to the right
- directories, and read through and configure the rest of the file to your
- liking.
+See [[ikiwiki/formatting]] for details about the markup language.
+
+Note that several [[standard_wiki_pages|basewiki]] will be added to your
+wiki, from files in `/usr/share/ikiwiki/basewiki/`, so your wiki will
+automatically get a [[SandBox]], and some other useful pages.
+
+## Build your wiki for the first time.
+
+ ikiwiki --verbose $SRCDIR $DESTDIR --url=http://example.org/~you/wiki/
- Note that the default file has a block to configure a svn wrapper. This
- sets up a [[post-commit]] hook to update the wiki.
+Replace the url with the real url to your wiki. You should now
+be able to visit the url and see your wiki.
- When you're satisfied, run `ikiwiki --setup ikiwiki.setup`, and it
- will set everything up and update your wiki.
+## Add content to your wiki.
-8. Set up [[CGI]] to allow editing the wiki from the web.
+Continue editing or adding pages and rebuilding the wiki.
+
+To quickly get started on a common task like blogging with ikiwiki, you
+can copy in files from the [[examples]]. The examples are located in
+`doc/examples/` in the ikiwiki source package.
- Just edit ikiwiki.setup, uncomment the block for the cgi wrapper, make
- sure the filename for the cgi wrapper is ok, run
- `ikiwiki --setup ikiwiki.setup`, and you're done!
+You can experiment with other ikiwiki parameters such as `--wikiname`
+and `--rebuild` too. Get comfortable with its command line (see
+[[usage]]).
-9. Add [[PageHistory]] links to the top of pages. This requires you to have
- setup [[ViewCVS]] or something similar to access your [[Subversion]]
- repository. The `historyurl` setting makes ikiwiki add the links, and
- in that url, "[[]]" is replaced with the name of the file to view. So
- edit ikiwiki.setup and set `historyurl` to something like this:
+## Add a setup file.
- `http://svn.host/trunk/[[]]?root=wiki`
+By now you should be getting tired of typing in all the command line
+options each time you change something in your wiki's setup. Time to
+introduce setup files.
+
+A sample setup file is [[ikiwiki.setup]]. Download it (or copy it from
+`doc/ikiwiki.setup` in the ikiwiki sources), and edit it. Note that this
+file should *not* be put in your wiki's directory with the rest of the
+files. A good place to put it is in a ~/.ikiwiki/ subdirectory.
- Then run `ikiwiki --setup ikiwiki.setup` again.
+Most of the options, like `wikiname` in the setup file are the same as
+ikiwiki's command line options (documented in [[usage]]. `srcdir` and
+`destdir` are the two directories you specify when running ikiwiki by
+hand. Make sure that these are pointing to the right directories, and
+read through and configure the rest of the file to your liking.
+
+When you're satisfied, run `ikiwiki --setup ikiwiki.setup`, and it
+will set everything up.
-10. Enjoy your new wiki! Add yourself to [[IkiWikiUsers]]
+## Turn on additional features.
+
+Now you have a basic wiki with a configuration file. Time to experiment
+with ikiwiki's many features.
+
+Let's first enable a key wiki feature and set up [[CGI]] to allow
+editing the wiki from the web. Just edit ikiwiki.setup, uncomment the
+block for the cgi wrapper, make sure the filename for the cgi wrapper
+is ok, run `ikiwiki --setup ikiwiki.setup`, and you're done!
+
+There are lots of other configuration options in ikiwiki.setup that you
+can uncomment, configure, and enable by re-running
+`ikiwiki --setup ikiwiki.setup`. Be sure to browse through all the
+[[plugins]]..
+
+## Put your wiki in revision control.
+
+At this point you might want to check your wiki in to a revision control
+system so you can keep track of changes and revert edits. Depending
+on the revision control system you choose, the way this is done varies.
+
+Note that the .ikiwiki subdirectory is where ikiwiki keeps its state, and
+should be preserved, but not checked into revision control.
+
+The new [[ikiwiki-makerepo]] command automates setting up a wiki in
+revision control.
+
+[[toggle id=subversion text="Subversion"]]
+[[toggleable id=subversion text="""
+ REPOSITORY=~/wikirepo
+ ikiwiki-makerepo svn $SRCDIR $REPOSITORY
+"""]]
+
+[[toggle id=git text="Git"]]
+[[toggleable id=git text="""
+ REPOSITORY=~/wiki.git
+ ikiwiki-makerepo git $SRCDIR $REPOSITORY
+
+Please see [[rcs/git]] for detailed documentation about how
+ikiwiki uses git repositories, and some important caveats
+about using the git repositories.
+"""]]
+
+[[toggle id=mercurial text="Mercurial"]]
+[[toggleable id=mercurial text="""
+ REPOSITORY=$SRCDIR
+ ikiwiki-makerepo mercurial $SRCDIR
+"""]]
+
+[[toggle id=bazaar text="Bazaar"]]
+[[toggleable id=bazaar text="""
+ REPOSITORY=$SRCDIR
+ ikiwiki-makerepo bzr $SRCDIR
+"""]]
+
+[[toggle id=tla text="TLA"]]
+[[toggleable id=tla text="""
+ REPOSITORY=~/wikirepo
+ tla make-archive me@localhost--wiki $REPOSITORY
+ tla my-id "<me@localhost>"
+ cd $SRCDIR
+ tla archive-setup me@localhost--wiki/wiki--0
+ tla init-tree me@localhost--wiki/wiki--0
+ # Edit {arch}/=tagging-method and change the precious
+ # line to add the .ikiwiki directory to the regexp.
+ tla add *
+ tla import
+"""]]
+
+[[toggle id=monotone text="Monotone"]]
+[[toggleable id=monotone text="""
+ # These instructions are standard instructions to import a directory into monotone
+ # and set it up so that you don't need any passwords to use it
+ REPOSITORY=~/.ikiwiki/mtn.db
+ BRANCH=com.company.wikiname
+ # remember the password you use in the next step and
+ # substitute it for 'wikiKeyPass' in the get_passphrase() hook below
+ # note the you should never generate two monotone keys with the same name
+ mtn genkey web@machine.company.com
+ mtn db init --db=$REPOSITORY
+ mv $SRCDIR $SRCDIR-old
+ cd $SRCDIR-old
+ echo ".ikiwiki" > $SRCDIR-old/.mtn-ignore
+ mtn --db=$REPOSITORY --branch=$BRANCH import . -m "initial import"
+ cd ..
+ mtn --db=$REPOSITORY --branch=$BRANCH checkout $SRCDIR
+ mv $SRCDIR-old/.ikiwiki $SRCDIR
+ cat << EOF > $SRCDIR/_MTN/monotonerc
+ function get_passphrase (branchname)
+ return "wikiKeyPass"
+ end
+ EOF
+ rm -r $SRCDIR-old
+"""]]
+
+## Configure ikiwiki to use revision control.
+
+Once your wiki is checked in to the revision control system,
+you should configure ikiwiki to use revision control. Edit your
+ikiwiki.setup, and uncomment the lines for the revision control system
+you chose to use. Be sure to set `svnrepo` to $REPOSITORY, if using
+subversion. Uncomment the block for the wrapper for your revision
+control system, and configure the wrapper path in that block
+appropriately (for Git, it should be `$REPOSITORY/hooks/post-update`).
+
+Once it's all set up, run `ikiwiki --setup ikiwiki.setup` once more.
+Now you should be able to edit files in $SRCDIR, and use your revision
+control system to commit them, and the wiki will automatically update.
+And in the web interface, RecentChanges should work, and files changed
+by web users will also be committed using revision control.
+
+## Enjoy your new wiki!
+
+Add yourself to [[IkiWikiUsers]]. And check out
+the [[tips]] to find out how to get more out of ikiwiki.