Note that for more formal bug reports or todo items, you can also edit the
[[bugs]] and [[todo]] pages.
-[[toc ]]
+[[!toc ]]
# Installation/Setup questions
-I ran into a problem when installing from svn. I got "invalid variable
-interpolation" errors for Wrappers.pm. I added the flag '--extract-all' to
-'po/Makefile' and 'po/t' to the xgettext line. Once I did that I was able
-to make and make test just fine. --HarleyPig
-
-> It would be helpful if you could post the actual error message you saw.
-> Also would be nice to know what versions of perl and gettext you have.
-> Perhaps your xgettext is an older version from before it natively
-> supported perl.
-> Adding --extract-all doesn't seem like a good idea, since this causes it
-> to treat every string in the entire wiki as translatable. I don't know
-> what you're talking about regarding 'po/t'. --[[Joey]]
-
-I have just installed ikiwiki and it works - at least I have the example index.mdwn page
-compiled and visible. However I have a few issues/problems:-
-
-* A couple of the 'optional' Perl modules aren't optional, you can't install ikiwiki without them,
-these are HTML::Template and HTML::Scrubber (at least I think it was these two, it's a bit messy
-to go back and find out).
-
-> You're right, HTML::Template is required. HTML::Scrubber is only required
-> in the default configuration, and is optional if the htmlscrubber plugin
-> is disabled. --[[Joey]]
-
-* I don't seem to have got an ikiwiki man page created.
-
-> It should be installed in /usr/share/man, or a similar directory
-> depending on how your perl is set up and how you did the install.
-> --[[Joey]]
+Ikiwiki creates a .ikiwiki directory in my wikiwc working directory. Should I
+"svn add .ikiwiki" or add it to svn:ignore?
+
+> `.ikiwiki` is used by ikiwiki to store internal state. You can add it to
+> svn:ignore. --[[Joey]]
+> > Thanks a lot.
+
+Is there an easy way to log via e-mail to some webmaster address, instead
+of via syslog?
+
+> Not sure why you'd want to do that, but couldn't you use a tool like
+> logwatch to mail selected lines from the syslog? --[[Joey]]
+
+> > The reason is that I'm not logged in on the web server regularly to
+> > check the log files. I'll see whether I can install a logwatch instance.
-> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki
-> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere
-> more sensible. [[Chris]]
-
-* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to
-my local settings. There are no errors but neither does anything get compiled. An ikiwiki
-command to explicitly do the compile works fine. Am I misunderstanding something here?
-
-> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild.
-> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything
-either though it was the command line I originally used to compile. After a long interval I 'touch'ed
-the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused!
-
-> ikiwiki only compiles files whose modification times have changed. It
-> should see any change made as close as a second after the last compile.
-> When run with --setup, ikiwiki always rebuilds every file in the wiki. If
-> --setup is not working, you must have it pointed at the wrong path or
-> something; you can pass -v to see what it's doing. I don't know why it
-> would not see recently changed files; you could try stracing it.
+I'm trying to install from scratch on a CentOS 4.6 system. I installed perl 5.8.8 from source and then added all the required modules via CPAN. When I build ikiwiki from the tarball, I get this message:
+
+ rendering todo/calendar_--_archive_browsing_via_a_calendar_frontend.mdwn
+ *** glibc detected *** double free or corruption (!prev): 0x0922e478 ***
+ make: *** [extra_build] Aborted
+
+I'm kind of at a loss how to track this down or work around it. Any suggestions? --Monty
+
+> All I can tell you is that it looks like a problem with your C library or
+> perl. Little perl programs like ikiwiki should only be able to trigger
+> such bugs, not contain them. :-) Sorry I can't be of more help.
> --[[Joey]]
-> OK, thanks, I don't quite know what was happening before but it seems to be working right now.
-> --[[Chris]]
+> I had a similar problem after upgrading to the latest version of
+> Text::Markdown from CPAN. You might try either looking for a Markdown
+> package for CentOS or using the latest version of John Gruber's
+> Markdown.pl:
+> <http://daringfireball.net/projects/downloads/Markdown_1.0.2b8.tbz>
+> --[[JasonBlevins]], April 1, 2008 18:22 EDT
->> Weird. I wish I knew what happened, but as it's working now, I'm
->> guessing some kind of user error was involved. --[[Joey]]
+>> Unfortunately I couldn't find a CentOS package for markdown, and I
+>> couldn't quite figure out how to use John Gruber's version instead.
+>> I tried copying it to site_perl, etc., but the build doesn't pick
+>> it up. For now I can just play with it on my Ubuntu laptop for which
+>> the debian package installed flawlessly. I'll probably wait for an
+>> updated version of Markdown to see if this is fixed in the future.
+>> --Monty
-* I wish there was a mailing list, much easier for this sort of stuff than this, apart from
-anything else I get to use a decent editor.
+>I suggest that you pull an older version of Text::Markdown from CPAN. I am using <http://backpan.perl.org/authors/id/B/BO/BOBTFISH/Text-Markdown-1.0.5.tar.gz> and that works just fine.
+>There is a step change in version and size between this version (dated 11Jan2008) and the next version (1.0.12 dated 18Feb2008). I shall have a little look to see why, in due course.
+>Ubuntu Hardy Heron has a debian package now, but that does not work either.
+> --Dirk 22Apr2008
+
+> This might be related to [Text::Markdown bug #37297](http://rt.cpan.org/Public/Bug/Display.html?id=37297).--ChapmanFlack 9Jul2008
+
+----
+
+# Installation of selected docs (html)
+
+The latest release has around 560 files (over 2MB) in html.
+
+Any suggestions or ideas on limiting what html is installed?
+
+For example, I don't see value in every ikiwiki install out there to also install personal "users" ikiwiki pages.
+
+For now I copy ikiwiki.setup. And then use pax with -L switch to copy the targets of the symlinks of the basewiki.
+
+I was thinking of making a list of desired documents from the html directory to install.
+
+--JeremyReed
+
+> You don't need any of them, unless you want to read ikiwiki's docs locally.
+>
+> I don't understand why you're installing the basewiki files manually;
+> ikiwiki has a Makefile that will do this for you. --[[Joey]]
+
+>> The Makefile's install doesn't do what I want so I use different installer for it.
+>> It assumes wrong location for man pages for me. (And it should consider using INSTALLVENDORMAN1DIR and
+>> MAN1EXT but I don't know about section 8 since I don't know of perl value for that.)
+>> I don't want w3m cgi installed; it is optional for my package.
+>> I will just patch for that instead of using my own installer.
+>> Note: I am working on the pkgsrc package build specification for this. This is for creating
+>> packages for NetBSD, DragonFly and other systems that use pkgsrc package system.
+>> --JeremyReed
+
+# Installation as non-root user
+
+I'd like to install ikiwiki as a non-root user. I can plow through getting all the
+perl dependencies installed because that's well documented in the perl world,
+but I don't know how to tell ikiwiki to install somewhere other than / --BrianWilson
+
+> Checkout the tips section for [[tips/DreamHost]]. It should do the trick. --MattReynolds
+
+----
+
+# Upgrade steps
+
+I upgrades from 1.40 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration.
+I had many errors like:
+
+ /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+and:
+
+ failed renaming /home/bsdwiki/www/wiki/smileys.ikiwiki-new to /home/bsdwiki/www/wiki/smileys: Is a directory
+ BEGIN failed--compilation aborted at (eval 5) line 129.
+
+Probably about six errors like this. I worked around this by removing the files and directories it complained about.
+Finally it finished.
+
+> As of version 2.0, ikiwiki enables usedirs by default. See
+> [[tips/switching_to_usedirs]] for details. --[[Joey]]
+
+>> I read the config wrong. I was thinking that it showed the defaults even though commented out
+>> (like ssh configs do). I fixed that part. --JeremyReed
+
+My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt
+me for a password but now just goes right into the "editing" mode.
+The release notes for 2.0 say password auth is still on by default.
+
+> It sounds like you have the anonok plugin enabled?
+
+>> Where is the default documented? My config doesn't have it uncommented.
+
+The third problem is that when editing my textbox is empty -- no content.
+
+This is using my custom rcs.pm which has been used thousands of times.
+
+> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I
+> fixed a bug that could result in the edit box always being empty back in
+> version 2.3. The only other way it could happen is if ikiwiki does not
+> have saved state about the page that it's editing (in .ikiwiki/index).
+
+>> Rebuilt it several times. Now that I think of it, I think my early problem of having
+>> no content in the textbox was before I rebuilt the cgi. And after I rebuilt the whole webpage was empty.
+
+Now I regenerated my ikiwiki.cgi again (no change to my configuration,
+and I just get an empty HTML page when attempting editing or "create".
+
+> If the page is completly empty then ikiwiki is crashing before it can
+> output anything, though this seems unlikely. Check the webserver logs.
+
+Now I see it created directories for my data. I fixed that by setting
+usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup
+but I still have empty pages for editing (no textbox no html at all).
+
+> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]]
+
+>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-"
+>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes).
+
+>>> You need to either figure out what your web server does with stderr
+>>> from cgi programs, or run ikiwiki.cgi at the command line with an
+>>> appropriate environment so it thinks it's being called from a web
+>>> server, so you can see how it's failing. --[[Joey]]
+
+(I am posting this now, but will do some research and post some more.)
+
+Is there any webpage with upgrade steps?
+
+> Users are expected to read [[news]], which points out any incompatible
+> changes or cases where manual action is needed.
+
+>> I read it but read the usedirs option wrong :(.
+>> Also it appears to be missing the news from between 1.40 to 2.0 unless they dont' exist.
+>> If they do exist maybe they have release notes I need?
+
+>>> All the old ones are in the NEWS file. --[[Joey]]
+
+--JeremyReed
+
+My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me.
+
+Also I forgot to mention that do=recentchanges works good for me. It uses my
+rcs_recentchanges in my rcs perl module.
+
+The do=prefs does nothing though -- just a blank webpage.
+
+> You need to figure out why ikiwiki is crashing. The webserver logs should
+> tell you.
+
+I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI.
+I was hoping for some output.
+
+I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes
+on changes to revision control modules. Has something changed? I will also look.
+
+> No, the rcs interface has not needed to change in a long time. Also,
+> nothing is done with the rcs for do=prefs.
+
+>> Thanks. I also checked differences between 1.40 Rcs plugins and didn't notice anything significant.
+
+--JeremyReed
+
+Another Followup: I created a new ikiwiki configuration and did the --setup to
+create an entirely different website. I have same problem there. No prompt for password
+and empty webpage when using the cgi.
+I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know.
+
+The only errors I see when building and installing ikiwiki are:
+
+ Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66.
+
+ gettext 0.14 too old, not updating the pot file
+
+I don't use GNU gettext on here.
+
+I may need to revert back to my old ikiwiki install which has been used to thousands of times (with around
+1000 rcs commits via ikiwiki).
+
+--JeremyReed
+
+I downgraded to version 1.40 (that was what I had before I wrote wrong above).
+Now ikiwiki is working for me again (but using 1.40). I shouldn't have tested on production system :)
+
+--JeremyReed
+
+I am back. On a different system, I installed ikiwiki 2.6.1. Same problem -- blank CGI webpage.
+
+So I manually ran with:
+
+ REQUEST_METHOD=GET QUERY_STRING='do=create&page=jcr' kiwiki.cgi
+
+And clearly saw the error:
+
+ [IkiWiki::main] Fatal: Bad template engine CGI::FormBuilder::Template::div: Can't locate CGI/FormBuilder/Template/div.pm
+
+So I found my version was too old and 3.05 is the first to provide "Div" support. I upgraded my p5-CGI-FormBuilder to 3.0501.
+And ikiwiki CGI started working for me.
+
+The Ikiwiki docs about this requirement got removed in Revision 4367. There should be a page that lists the requirements.
+(I guess I could have used the debian/control file.)
+
+> There is a page, [[install]] documents that 3.05 is needed.
+
+>> Sorry, I missed that. With hundreds of wikipages it is hard to read all of them.
+>> I am updating the download page now to link to it.
+
+I am now using ikiwiki 2.6.1 on my testing system.
+
+--JeremyReed
----
# Excellent - how do I translate a TWiki site?
> Jamey Sharp and I have a set of scripts in progress to convert other wikis to ikiwiki, including history, so that we can migrate a few of our wikis. We already have support for migrating MoinMoin wikis to ikiwiki, including conversion of the entire history to Git. We used this to convert the [XCB wiki](http://xcb.freedesktop.org/wiki/) to ikiwiki; until we finalize the conversion and put the new wiki in place of the old one, you can browse the converted result at <http://xcb.freedesktop.org/ikiwiki>. We already plan to add support for TWiki (including history, since you can just run parsecvs on the TWiki RCS files to get Git), so that we can convert the [Portland State Aerospace Society wiki](http://psas.pdx.edu) (currently in Moin, but with much of its history in TWiki, and with many of its pages still in TWiki format using Jamey's TWiki format for MoinMoin).
>
-> Our scripts convert by way of HTML, using portions of the source wiki's code to render as HTML (with some additional code to do things like translate MoinMoin's `\[[TableOfContents]]` to ikiwiki's `\[[toc ]]`), and then using a modified [[cpan HTML::WikiConverter]] to turn this into markdown and ikiwiki. This produces quite satisfactory results, apart from things that don't have any markdown equivalent and thus remain HTML, such as tables and definition lists. Conversion of the history occurs by first using another script we wrote to translate MoinMoin history to Git, then using our git-map script to map a transformation over the Git history.
+> Our scripts convert by way of HTML, using portions of the source wiki's code to render as HTML (with some additional code to do things like translate MoinMoin's `\[[TableOfContents]]` to ikiwiki's `\[[!toc ]]`), and then using a modified [[!cpan HTML::WikiConverter]] to turn this into markdown and ikiwiki. This produces quite satisfactory results, apart from things that don't have any markdown equivalent and thus remain HTML, such as tables and definition lists. Conversion of the history occurs by first using another script we wrote to translate MoinMoin history to Git, then using our git-map script to map a transformation over the Git history.
>
> We will post the scripts as soon as we have them complete enough to convert our wikis.
>
-> -- Josh Triplett
+> -- [[JoshTriplett]]
>> Thanks for an excellent Xmas present, I will appreciate the additional
>> users this will help switch to ikiwiki! --[[Joey]]
-----
-
-# asciidoc or txt2tags ?
-Any plugins or support for using asciidoc or txt2tags as the wiki language and/or exporting to asciidoc or txt2tags?
+>> Sounds great indeed. Learning from [here](http://www.bddebian.com/~wiki/AboutTheTWikiToIkiwikiConversion/) that HTML::WikiConverter needed for your conversion was not up-to-date on Debian I have now done an unofficial package, including your proposed Markdown patches, apt-get'able at <pre>deb http://debian.jones.dk/ sid wikitools</pre>
+>> -- [[JonasSmedegaard]]
-> No, but it should be quite easy to write such a plugin. The otl plugin
-> is a good example of writing a formatting plugin that uses an external
-> conversion program, like asciidoc or txt2tags. --[[Joey]]
-----
+>>I see the "We will post the scripts ...." was committed about a year ago. A current site search for "Moin" does not turn them up. Any chance of an appearance in the near (end of year) future?
+>>
+>> -- [[MichaelRasmussen]]
-# LaTeX support?
+>>> It appears the scripts were never posted? I recently imported my Mediawiki site into Iki. If it helps, my notes are here: <http://iki.u32.net/Mediawiki_Conversion> --[[sabr]]
-Any plugins or support for exporting to LaTeX?
-(If not could use asciidoc or txt2tags mentioned above to generated LaTeX.)
+>>>>> The scripts have been posted now, see [[joshtriplett]]'s user page,
+>>>>> and I've pulled together all ways I can find to [[convert]] other
+>>>>> systems into ikiwiki. --[[Joey]]
-> It's already [[been_requested|todo/latex]], although perhaps not
-> working the way you're thinking of. Noone is currently working on it.
-> --[[Joey]]
+----
->> I did some tests with using Markdown and a customized HTML::Latex and html2latex
->> and it appears it will work for me now. (I hope to use ikiwiki for many
->> to collaborate on a printed book that will be generated at least once per day in PDF format.)
->>
->> --JeremyReed
+# LaTeX support?
->>> Have a look at [pandoc](http://code.google.com/p/pandoc/). It can make PDFs via pdflatex. --[[roktas]]
+Moved to [[todo/latex]] --[[Joey]]
----
# Using with CVS?
-Any examples of using ikiwiki with cvs?
-
-> No, although the existing svn backend could fairly esily be modified into
-> a CVS backend, by someone who doesn't mind working with CVS. --[[Joey]]
+Moved to a [[todo_item|todo/CVS_backend]]. --[[JoshTriplett]]
----
# Show differences before saving page?
-It would be nice to be able to have a button to show "Differences" (or "Show Diff") when
-editing a page. Is that an option that can be enabled?
-
-> It's doable, it could even be done by a [[todo/plugin]], I think.
-> --[[Joey]]
+Moved to the existing [[todo_item|todo/preview_changes]]. --[[JoshTriplett]]
----
Any setting for limiting how many kilobytes can be submitted via the "edit" form?
-- [[JeremyReed]]
-> Not currently. Worried about abuse? --[[Joey]]
-
->> I didn't want it abused accidently or with malice. I was thinking that Perl's CGI.pm would handle this, but I don't see that.
->> I read that textarea max bytes may be 500 lines or 28000 characters or 30000 characters or 64kB. It seems like it
->> varies and I didn't test myself, because I guess it may depend on different clients and different HTTP servers.
->> This could be checked using javascript on the client side (before submitting) and by checking size on server side (before saving). --[[JeremyReed]]
-
->>> The absolute limit varies by browser. If there are web servers that
->>> also limit it, I don't know of them. --[[Joey]]
-
-----
-
-# Access Keys
-
-Would anyone else find this a valuable addition. In oddmuse and instiki (the only other
-wiki engines I am currently using, the edit, home, and submit link tags have an
-accesskey attribute. I find it nice not to have to resort to the mouse for those
-actions. However, it may not be something everyone appreciates. Any thoughts?
---[Mazirian](http://mazirian.com)
-
-> Maybe, although it would need to take the critisism at
-> http://www.cs.tut.fi/~jkorpela/forms/accesskey.html into account.
-
->> Thank you for that link. Given that the edit link is the first thing you tab to
->> in the current layout, I guess it isn't all that necessary. I have had a
->> a user complaint recently that Alt-e in oddmuse was overriding his access
->> to the browser menu.
+>>> See [[todo/fileupload]] for an idea on limiting page size. --[[Joey]]
----
It would be nice to be able to edit the stylesheet by means of the cgi. Or is this possible? I wasn't able to achieve it.
Ok, that's my last 2 cents for a while. --[Mazirian](http://mazirian.com)
-> I don't support editing it, but if/when ikiwiki gets file upload support,
+> I don't support editing it, but if/when ikiwiki gets [[todo/fileupload]] support,
> it'll be possible to upload a style sheet. (If .css is in the allowed
> extensions list.. no idea how safe that would be, a style sheet is
> probably a great place to put XSS attacks and evil javascript that would
----
-# RecentChanges should show path to wiki sub-pages?
-
-The RecentChanges only shows the final file name for the recently changes file,
-for example "discussion". It would be more useful to see "index/discussion"
-or the path to the sub-page. I think this is handled by the htmllink() routine.
-
-> Went ahead and did this, IMHO the display is ok as-is. --[[Joey]]
-
-----
-
# Should not create an existing page
This might be a bug, but will discuss it here first.
----
-# Refreshing RecentChanges page
+# Spaces in WikiLinks?
-What do you think about refreshing RecentChanges page (via Meta Refresh Tag)?
-It can be useful for users like me which rather prefer watching the last changes
-in WWW browser tab than subscribing to page. --Pawel
+Hello Joey,
-> Depends, if it were done the time period should be made configurable.
-> Unwanted server load due to refeshing could be a problem for some.
-> --[[Joey]]
+I've just switched from ikiwiki 2.0 to ikiwiki 2.2 and I'm really surprised
+that I can't use the spaces in WikiLinks. Could you please tell me why the spaces
+aren't allowed in WikiLinks now?
+
+My best regards,
+
+--[[PaweB|ptecza]]
+
+> See [[bugs/Spaces_in_link_text_for_ikiwiki_links]]
+
+----
+
+# Build in OpenSolaris?
+
+Moved to [[bugs/build_in_opensolaris]] --[[Joey]]
+
+----
+
+# Various ways to use Subversion with ikiwiki
+
+I'm playing around with various ways that I can use subversion with ikiwiki.
+
+* Is it possible to have ikiwiki point to a subversion repository which is on a different server? The basic checkin/checkout functionality seems to work but there doesn't seem to be any way to make the post-commit hook work for a non-local server?
+
+> This is difficult to do since ikiwiki's post-commit wrapper expects to
+> run on a machine that contains both the svn repository and the .ikiwiki
+> state directory. However, with recent versions of ikiwiki, you can get
+> away without running the post-commit wrapper on commit, and all you lose
+> is the ability to send commit notification emails.
+
+> (And now that [[recentchanges]] includes rss, you can just subscribe to
+> that, no need to worry about commit notification emails anymore.)
+
+* Is it possible / sensible to have ikiwiki share a subversion repository with other data (either completely unrelated files or another ikiwiki instance)? This works in part but again the post-commit hook seems problematic.
+
+--[[AdamShand]]
+
+> Sure, see ikiwiki's subversion repository for example of non-wiki files
+> in the same repo. If you have two wikis in one repository, you will need
+> to write a post-commit script that calls the post-commit wrappers for each
+> wiki.
+
+----
+
+# Regex for Valid Characters in Filenames
+
+I'm sure that this is documented somewhere but I've ransacked the wiki and I can't find it. :-( What are the allowed characters in an ikiwiki page name? I'm writing a simple script to make updating my blog easier and need to filter invalid characters (so far I've found that # and , aren't allowed ;-)). Thanks for any pointers. -- [[AdamShand]]
+
+> The default `wiki_file_regexp` matches filenames containing only
+> `[-[:alnum:]_.:/+]`
+>
+> The titlepage() function will convert freeform text to a valid
+> page name. See [[todo/should_use_a_standard_encoding_for_utf_chars_in_filenames]]
+> for an example. --[[Joey]]
+
+>> Perfect, thanks!
+>>
+>> In the end I decided that I didn't need any special characters in filenames and replaced everything but alphanumeric characters with underscores. In addition to replacing bad characters I also collapse multiple underscores into a single one, and strip off trailing and leading underscores to make tidy filenames. If it's useful to anybody else here's a sed example:
+>>
+>> # echo "++ Bad: ~@#$%^&*()_=}{[];,? Iki: +_-:./ Num: 65.5 ++" | sed -e 's/[^A-Za-z0-9_]/_/g' -e 's/__*/_/g' -e 's/^_//g' -e 's/_$//g'
+>> Bad_Iki_Num_65_5
+>>
+>>--[[AdamShand]]
+
+# Upgrade steps from RecentChanges CGI to static page?
+
+Where are the upgrade steps for RecentChanges change from CGI to static feed?
+I run multiple ikiwiki-powered sites on multiple servers, but today I just upgraded one to 2.32.3.
+Please have a look at
+<http://bsdwiki.reedmedia.net/wiki/recentchanges.html>
+Any suggestions?
+
+> There are no upgrade steps required. It does look like you need to enable
+> the meta plugin to get a good recentchanges page though.. --[[Joey]]
+
+# News site where articles are submitted and then reviewed before posting?
+
+I am considering moving a news site to Ikiwiki. I am hoping that Ikiwiki has a feature where anonymous posters can submit a form that moderators can review and then accept for it to be posted on a news webpage (like front page of the website).
+
+> Well, you can have one blog that contains unreviewed articles, and
+> moderators can then add a tag that makes the article show up in the main
+> news feed. There's nothing stopping someone submitting an article
+> pre-tagged though. If you absolutely need to lock that down, you could
+> have one blog with unreviewed articles in one subdirectory, and reviewers
+> then move the file over to another subdirectory when they're ready to
+> publish it. (This second subdirectory would be locked to prevent others
+> from writing to it.) --[[Joey]]
+
+Also it would be good if the news page would keep maybe just the latest 10 entries with links to an archive that make it easy to browse to old entries by date. (Could have over a thousand news articles.)
+
+> The inline plugin allows setting up things like this.
+
+Plus users be able to post feedback to news items. If anonymous, they must be approved first. I'd prefer to not use normal "wiki" editor for feedback.
+
+Any thoughts or examples on this? Any links to examples of news sites or blogs with outside feedback using ikiwiki?
->> Yes, it should be configurable by ikiwiki admin. I believe he's not
->> stupid and he will not set too short refresh period to kill his server :)
->> I propose to add `recentchanges_refresh` variable in ikiwiki setup
->> to setting refresh period. If it's not defined, then ikiwiki doesn't put
->> refresh meta tag into `recentchanges.tmpl`. Do you like it? ;) --Pawel
+Thanks --[[JeremyReed]]
->>> Seems reasonable --[[Joey]]